TS-LS300

AutoLearn™

The TS-LS300 AutoLearn™ line leak detection system learns the exact characteristics of each line, ensuring unparalleled accuracy. It can run independently or with any TS-1001, TS-2001 or TS-508 tank gauge.

Highlights
Specs
Order Info
Downloads
  • Highlights

    • Automatically learns exact pipeline characteristics.
    • No pipe type and length programming required.
    • Monitors flexible, steel and/or fiberglass pipelines in any combination up to certified maximum values.
    • Works with submersible pumps generating 25 psi or more.
    • Automatically performs 3.0 gph, 0.2 gph and 0.1 gph line tests.
    • Positive submersible pump shutdown in the event of a leak.
    • Can be monitored through ATG and System Sentinel™.
    • Third party certified for 0% probability of false alarm.
    • Eliminates the need for factory calibration or on-site field judgments for set-up.
    • For use in rigid, flex and rigid/flex piping configuration.
    • Immediate notification of alarm condition.
    • Allows printed compliance reports.
  • Specs

    Console Specifications

    • Number of lines monitored: 1, 2, 3 or 4.
    • Dimensions: 11" × 12" × 4".
    • Power requirements:
    • 115 VAC - +15%, -10%, 100 Watts maximum, 1 Amp maximum.
    • 230 VAC - +15%, -10%, 100 Watts maximum, 0.5 Amp maximum.
    • Operating temperature: 20° to 122 °F (10° to 50 °C).

    Leak Sensing Transducer Specifications

    • Number of lines monitored: 1.
    • Dimensions: 6-1/4" × 2" NPT.
    • Applicable liquids: motor fuels.
    • Power requirements:
    • 10 to 20 VDC from console.
    • Operating temperature: -40° to 149 °F (-40° to 66 °C).
    • Operating pressure: 0 to 100 psi (0 to 689 kPa).
    • Belden™ cable: #9363-22 AWG, #9364-20 AWG or #9365-18 AWG.
    • Max. sensor to console cable distance:
    • 500' (152.4 M).
    • Sensor port fitting: 2" female NPT.
    • Sensor material: anodized aluminum body and stainless steel sensor.
    • Intrinsic safety rating: Class 1, Div. 1, Group D, II (1) G [EEX la] IIA T4

    Capabilities

    • The TS-LS300 performs a 3.0 gph leak and pressure test after every dispense. Upon detection of a failed test, the LS300 will alarm and positively shutdown the affected turbine.
    • The TS-LS300 continuously monitors pressurized lines for thermally stable conditions and performs a 0.2 gph monthly and 0.1 gph annual precision leak test during the thermally stable union.
    • AutoLearn™ line leak detection technology is also available with the TS-LS500, part of the EVO™ Series 550 and EVO™ Series 5000 fuel management systems.

    Approvals

    • UL, cUL, ATEX
    • Third party certification of leak detection capabilities
  • Order Info

    TS-LS300, 115 VAC 50/60 Hz Models

    Intrinsically Safe

    For new installations where separate low voltage conduits can be used.

    ModelDescription
    TS-LS300/22-line console with line calibration kit
    TS-LS300/33-line console with line calibration kit
    TS-LS300/44-line console with line calibration kit
    • Note: All AutoLearn™ models include the TPI turbine pump interface module.

    TS-LS300, 230 VAC 50/60 Hz Models

    Intrinsically Safe

    For new installations where separate low voltage conduits can be used.

    ModelDescription
    VS-LS300/22-line console with line calibration kit
    VS-LS300/33-line console with line calibration kit
    VS-LS300/44-line console with line calibration kit
    • Note: All AutoLearn™ models include the TPI turbine pump interface module.

    Interface Cable

    For connecting two AutoLearn™ consoles together.

    ModelDescription
    TSSP-ALICBLAutoLearn™ interface cable

    Alternative Fuels Accessories

    ModelDescription
    TS-AFALNIPLeak generator needle valve kit required for E85 installations
  • Downloads