 |
|
|
Sump Test System KitThe TS-STS sump test system is designed specifically to test dispenser and turbine containment sumps for leaks. Up to four sumps can be leak-tested simultaneously with accurate compliance test results available in just 15 minutes. The system consists of two carrying cases containing a TS-STS console and Quick Start Guide in one, and leak test probes and cables in the other. |
Features
- Designed to deliver cost-effective environmental compliance test data.
- Easily transported in two supplied carrying cases.
- Easily set-up and programmed with site-specific data and sump identification before a test. Site and test data can also be saved to a laptop database.
- Laptop interface optional using INCON System Sentinel™ Tech Software.
- Accommodates up to four probes for testing of up to four dispensers or four turbine containment sumps simultaneously.
- Uses INCON’s magnetostrictive probe technology for unparalleled accuracy and reliable results.
- Highly accurate leak test detects level changes greater than 0.002 inches during the short fifteen minute test.
- Provides accurate test solution levels for each sump monitored.
- Automatically prints out passed and/or failed sump leak test reports in just fifteen minutes after starting a leak test. Printer included.
- Shows the date and time of the test, test-solution levels and the leak test results on sump leak test reports.
- Additional sump leak test reports can also be printed at the console before other tests are completed.
Kit Includes
- TS-STS Sump Test System in case
- Three rolls of printer paper (one installed in printer)
- Quick Start User’s Guide
- Probes assembled with floats, cable, chain and split ring in case
Specifications
| UNIT MODEL | CONSOLE LEAK | TEST PROBES |
|---|---|---|
| Operating temperature | 32º to 122º F 0º to 50º C | -40º to 140º F -40º to 60º C |
| Storage temperature -4º to 140º F | -20º to 60º C | -40º to 158º F -40º to 70º C |
| Intrinsic Safety Rating | Class I, Div. 1, Group D | |
| Carrying case (weight and dimensions) | 33 lbs./15 kilos. 24” × 19” × 8.5” 62 cm × 49 cm × 22 cm | 30 lbs./13.5 kilos 38” × 18” × 6” 97 cm × 45 cm × 16 cm |
| Number of sumps monitored | 1, 2, 3 or 4 | 1 per sump |
| Applicable liquids | Testing solution | |
| Level units | Inches | |
| Display type and size | Alphanumeric LCD 2 lines of 40 characters | |
| Printer type | 24 column thermal printer | |
| Power requirements | 115 VAC, 50 Watts, 6’ power cord with 3 prong plug supplied | 50’ cable supplied |
Spare Parts
| PART NUMBER | DESCRIPTION |
|---|---|
| STS-PRB-12 | 12” Leak Test Probe |
| TS-PRB-1 | 12” Leak Test Probe Kit* |
| TSP-SSP | Stainless Steel Probe Float |
| 600-0200 | Probe Cable 50 ft. |
| TS-TP2 | One box (5 rolls) of thermal printer paper |
| 282-0027 | Chain, including split ring |
| 282-0058 | Split ring |
| STS-CASE | STS Probe Case |
| STS-REPAIR | STS System Repair |
Ordering Information
| PART NUMBER | DESCRIPTION |
|---|---|
| Technical License* | |
| SS-Tech | Distributor/Tech. Version of System Sentinel™ |
| PART NUMBER | DESCRIPTION |
|---|---|
| TS-STS | |
| TS-STS-2k | Sump Test System with two (2) probes |
| TS-STS-3k | Sump Test System with three (3) probes |
| TS-STS-4k | Sump Test System with four (4) probes |
 |