 |
|
|
TS-CIM External Console Hardware AccessoryThe TS-CIM control input module is a BriteBox™ expansion control module that allows the Tank Sentinel® automatic tank gauges (ATGs) to accept alarm signals from other systems and generate appropriate alarms in the ATG during emergencies. Not available on TS-750 consoles. |
Features
- Economical control module for control and alarm conditions.
- Provides additional leak test inhibit function when used with backup generator ATG configurations.
- Accepts up to eight input signals. Contains input/output system which can be equipped with up to eight optically isolated plug-in modules that will provide an input signal to the Tank Sentinel® console when signal voltage is present.
- Input modules are available in 90-120 VAC, 3.3-32 VDC or 18-60 VDC versions.
Installation
- May be installed when Tank Sentinel® is originally installed or added later.
- BriteBox™ (5” × 7”) mounted no further than 18 inches from Tank Sentinel® console.
- Wiring: Ten conductor BriteBus™ ribbon cable run through ¾” flexible or rigid conduit connecting Tank Sentinel® console to BiteBox™ enclosure. (Optional TS-KB installation kit recommended.)
- Wiring from the external device circuits is connected to the field terminal strip in the TS-CIM.
Ordering Information
| PART NUMBER | DESCRIPTION |
|---|---|
| BriteBox™ Modules (not available on TS-750 and FMS Consoles) | |
| TS-CIM1 | 8-Channel, Control Input Module |
| TS-CIM BriteBox™ plug-in input modules | |
| IMDC60 | 18 to 60 VOLT DC Input Module |
| Optional Accessories | |
| TS-KB | Installation Kit (BriteBox™ to BriteBox™, or to console) |
Note:
- Up to four BriteBoxes™ can be connected to the console (two SEM’s, one TS-ROM and one TS-CIM1 can be connected).
- One TS-ROM BriteBox™ is typically used for positive pump shutdown when certain alarms occur.
- Order one TS-KB install kit for each BriteBox™ (includes ribbon cable, flexible conduit and fittings).
 |