TS-EMS Environmental Monitoring System

Applications

The flexible architecture of the TS-EMS allows multiple applications to run concurrently, satisfying multiple monitoring needs.

• The standard vapor recovery monitoring application gauges the effectiveness of a station’s vapor recovery equipment through continuous monitoring of gasoline vapors during fueling operations.
• The optional secondary containment monitoring application continuously monitors the interstitial spaces of double wall tanks, lines and sumps and notifies station owners when a release of product into the environment has occurred.
• Can be upgraded to full Fuel Management System in the future if existing ATG fails.

Features/Capabilities

Features

• Standalone ISD system
• Approved by the California Air Resource Board EO VR-202.
• Includes TS-VRM vapor recovery monitoring software and optional secondary containment monitoring.
• Dispenser-based disabling prevents the entire site from shutting down in the event of an EVR failure.
• Ethernet-ready, web-based remote access provides the user with remote access to VRM status information, reports and alarm information using any web browser.
• Create custom rules to send e-mails and text messages on alarms and event directly from the console to service and compliance personnel.
• User-friendly touch screen interface with icon-based navigation.
• Scalable open architecture for easy and cost-saving future upgrades.
• Can be upgraded to full Fuel Management System in the future if existing ATG fails.

Capabilities

• Standard Ethernet connection allows easy integration to existing wide area networks.
• XML-based software allows remote access to data without additional software.
• Graphical touch screen LCD allows text to be displayed in native language.
• Generic interface modules give flexibility in configuring station monitoring requirements.
• E-mail notification gives station owners real-time status information.
• Multiple printing options give flexibility in style and format of reports.

Ordering Information

The TS-EMS environmental monitoring system comes standard with display, printer, dispenser interface and other required modules. An internal TS-MDMIB modem can be added as a hardware option. Order the TEMSDPI/VS if the secondary containment monitoring software option is required.

MODEL	DESCRIPTION
TEMSDPI/V	TS-EMS console with display, printer, DIM, VRM software and one TS-PRB, TS-ACI, TS-420IB and TS-10ARLY.
TEMSDPI/VS	TS-EMS console with display, printer, DIM, VRM and SCM software, and one TS-PRB, TS-ACI, TS-420IB and TS-10ARLY.
TEMS2DPI/V	TS-EMS console with display, printer, DIM, VRM software, one TSPRB and TS-420IB, two TS-ACI and TS10ARLY
TEMS2DPI/VS	TS-EMS console with display, printer, DIM and SCM software, one TS-PRB and TS-420IB, two TS-ACI and TS-10ARLY.
TEMS3DPI/V	TS-EMS console with display and printer for use with TS-DTU. Includes DIM, VRM software, one TS-ACI and TS-10ARLY.

Notes:

1. Appropriate DIM cable must be ordered separatey.
2. Standard module set can support up to six dispensers. Order one additional TS-ACI and TS-10ARLY module to support up to twelve dispensers.
3. The appropriate number of TS-VFM vapor flow meters and one TS-VPS vapor pressure sensor must be ordered separately to perform vapor recovery monitoring.

TS-EMS Console Hardware and Software Options

TS-EMS consoles come standard with the ability to perform vapor recovery monitoring. The following software and hardware options can be added to customize your console. The internal hardware options will be factory installed when ordered with the console.

Internal Hardware Options
PART NUMBER	DESCRIPTION
TS-MDMIB	(M) Internal modem, includes fax and data software capability

Internal Software Options
PART NUMBER	DESCRIPTION
TS-SCM	(S) Secondary containment monitoring

TS-EMS Fuel Management System Console Interface Modules

TS-EMS consoles come standard with a power supply module, a controller module and one probe, AC input, 4-20 mA and 10 Amp relay modules. This configuration will support vapor recovery monitoring for up to six dispensers. Depending on the site configuration more than one of some modules may be required. Interface modules ordered with a console will be installed at the factory. Six total modules can be installed with a maximum of four intrinsically safe modules and a maximum of three of any one kind of module.

Intrinsically Safe Modules
PART NUMBER	DESCRIPTION
TS-PRB	12 input probe module, VFM flow meters
TS-420IB	8 input 4-20 mA module, VPS and SCCM pressure sensors

Non-Intrinsically Safe Modules
PART NUMBER	DESCRIPTION
TS-ACI	12 input AC input module, dispenser hook inputs
TS-RLY	8 output relay module, low power dispensers and SCCM solenoids
TS-10ARLY	6 output 10 Amp relay output module, high power dispensers and SCCM solenoids

Dispenser Interface Module Cables
PART NUMBER	DESCRIPTION
TSP-WDCBL	Wayne cable
TSP-TDCBL	Tokheim cable
TSP-GDCBL	Gilbarco cable
TSP-GSDCBL	Gilbarco G-Site cable