 |
|
|
TSP-HLS Leak Detection SensorThe TSP-HLS Leak Detection Sensor is an overfill prevention switch which is compatible with all Tank Sentinel® Automatic Tank Gauge consoles. It may be adjusted to operate over a wide range of levels. The TSP-HLS is based on float-switch technology and is made of chemical resistant materials to assure compatibility with most liquids. Each sensor is supplied with jacketed cable five feet in length. The TSP-HLS’s normally closed output circuit provides supervised operation, ensuring that broken wires and similar failures will not go undetected. |
Theory of Operation
-
The secret to the TSP-HLS’s reliability
is its float switch technology. A small
magnetically activated reed switch is
located inside the body of the sensor.
Tiny magnets are positioned inside a
light weight float which is free to move
up and down along the shaft so that
the magnets are below the reed switch.
When the sensor is immersed in liquid,
the float rises and the magnet activates
the reed switch, signaling the console
that the high limit has been reached.
Applications
-
The TSP-HLS is installed in a two inch
operates may be adjusted by loosening
the tank as required.
Ordering Information
| PART NUMBER | DESCRIPTION |
|---|---|
| TSP-HLS-15 | High Product Level Sensor - 15" (381 mm) long, installed in tank |
| TSP-HLS-15 /SS | High Product Level Sensor - Stainless Steel 15"e; (381 mm) long, in- stalled in tanks containing alternative fuels |
| TSP-HLS-30 | High Product Level Sensor - 30" (762 mm) long, installed in tank |
| TSP-HLS-30 /SS | High Product Level Sensor - Stainless Steel 30" (762 mm) long installed in tanks containing alternative fuels |
 |