FORMAT: The Tank Sentinel® part number is divided into three sections: Model, Hardware Options/Software
Options.
EXAMPLE: T2P/8S (TS2001 with a printer option/software SCALD option that supports eight tanks).
MODEL | VOLTAGE | MODEL CODE |
|---|---|---|
TS-1001 |
120 VAC |
T1 |
TS-1001 |
220 VAC |
V1 |
TS-2001 |
120 VAC |
T2 |
TS-2001 |
220 VAC |
V2 |
TS-504 |
120 VAC |
T504 |
TS-504 |
220 VAC |
V504 |
TS-508 |
120 VAC |
T508 |
TS-508 |
220 VAC |
V508 |
TS-750 |
120 VAC |
T750 |
TS-750 |
220 VAC |
V750 |
The following table shows the values that the hardware section can assume. Note that the order of the specific option in the final part number is fixed. The order of the options in the table refl ects this (i.e. P will always be before M).
HARDWARE | OPTION CODE | TS-1001 | TS-2001 | TS-504 | TS-508 | TS-750 |
|---|---|---|---|---|---|---|
Printer |
P |
Std. |
Std. |
Yes |
Yes |
Std. |
Internal Modem |
M |
Yes |
Yes |
Yes |
Yes |
Yes |
Internal Expansion Module |
1 or 2 |
No |
Yes |
No |
No |
No |
Notice: The order of specific option in the table determines position in the fi nal part number. ALL options except the Internal Expansion Module are determined by a setting programmed into the ID chip. Internal Expansion Modules is determined at power up via presence of hardware module(s).
The following table shows the values that the software section can assume. Note that the order of the specific option in the final part number is fixed. The order of the options in the table reflects this (i.e. 8 will always be before S, which should always be before D).
HARDWARE | OPTION CODE | TS-1001 | TS-2001 | TS-504 | TS-508 | TS-750 |
|---|---|---|---|---|---|---|
Number of tanks |
0, 2, 4, 8 |
0, 2, 4 |
8 |
4 |
8 |
1, 2, 3, 4 |
SCALD or Generator |
S, G |
Yes |
S |
No |
No |
S |
Data Fax/Data Modem |
D, F |
Yes |
Yes |
Yes |
Yes |
Yes |
Continental version |
C |
Yes |
Yes |
Yes |
Yes |
Yes |
Line Leak Detection |
L |
Yes |
Yes |
Yes |
Yes |
No |
Reconciliation |
R |
Yes |
Yes |
Yes |
Yes |
No |
Note: