Internal Console Hardware Enhancements
| PART NUMBER | DESCRIPTION |
| TSSP-FDM2 |
(M) Internal modem (see software enhancements) |
| TS-2001 consoles only |
| TS-IEM |
8 Channel Internal I/O Board |
| Solid State, Plug-in Modules for TS-IEM I/O Board |
| DC28I |
2.5 to 28 Volt DC - DC Input Module |
| DC60I |
35 to 60 Volt DC - DC Input Module |
| AD140I |
90 to 140 Volt AC or DC (dual purpose) AC/DC Input Module |
| AD240I |
180 to 240 Volt AC or DC (dual purpose) AC/DC Input Module |
| DRYCONNO |
Form A SPST Normally Open Dry Contact Output Module Max Switching Voltage - 130 VAC |
| DRYCONNC |
Form B SPST Normally Closed Dry Contact Output Module Max Switching Voltage - 130 VAC |
Note:
One or two, eight channel TS-IEM Internal Expansion Modules can be installed only in
the TS-2001 consoles (order quantity required).
The TS-IEM board requires Solid State Input or Output Modules. Up to eight (maximum)
can be plugged into a TS-IEM I/O Board (order type and quantity required). Input
modules monitor states or conditions and output modules control external devices such
as a pump relays.
Console Software Enhancements
| PART NUMBER | DESCRIPTION |
| TS-SCALD |
(S)* Statistical Continuous Automatic Leak Detection, 24 hour Continuous Tank Testing Software |
| TS-DOM2 |
(D)** Data Only Modem Software |
| TS-FM2 |
(F)** Fax and Data Modem Software |
| TS-LLDI |
(L)*** Line Leak Detector Interface Software |
| TS-Reconciliation |
(R)**** Dispenser Reconciliation Software |
*SCALD is not available with Inventory Control Consoles or Backup Generator Consoles
(the S in the console part number identifies this option). SCALD is used in 24 hour locations
for tank leak testing.
**TSSP-FDM2 Internal Modem hardware is required (the M before the forward slash in the
console part number identifies this option). Choose Data Only Modem software to support
System Sentinel™ software, or choose Fax and Data Modem software when faxed reports
are required.
***Electronic Line Leak Detector hardware is required (the L in the console part number
identifies this option). This interface software enables line leak detector compliance
reporting and line leak test scheduling capability. Not available on the TS-750 console.
****TS-DIM Dispenser Interface Module hardware is required (the R in the console part
number identifies this option). This option provides Automated Inventory Reconciliation.
Not available on the TS-750 console.
