2 hp Fixed Speed Submersible Turbine Pumps

Design Highlights/Advantages

• Highest Flow - The STPM200 with MagShell™ provides flow rates previously unavailable in 4” fixed speed submersible pumps. One pump can provide good flow rates for up to 8-10 retail nozzles flowing simultaneously. FE Petro offers the 2 hp performance in both standard and high pressure models to fit any application.
• MagShell™ - MagShell™ is a standard feature on our 2 hp models. The motor shell is expanded to increase the flow area around the motor by 45%, resulting in significantly higher flow rates. MagShell™ is constructed of 304 stainless steel, making them the highest performing 2 hp fixed speed submersibles ever offered. Higher flow means faster fill rates during peak business periods, increase daily throughput and your profit potential.
• FE Petro 1 1/2 and 2 hp turbines fuel cars faster during peak business hours due to the higher pump performance. One reason your customers will keep coming back.
• Easy Upgrade - If you have existing STP’s in your stations and want faster flow rates, consider upgrading to a 2 hp MagShell™ pump motor from FE Petro. The pump motor is compatible with existing FE Petro and competitive make submersible pumps. Increase flow rates 1 to 2 GPM per nozzle with 5-8 nozzles operating. Get the newest technology available and go easy on your budget at the same time. FE Petro pump motors sell for about 1/3 the cost of a complete pump change-out.

Specifications

Power Requirements

• 2 hp fixed speed models require single phase, 208-230 VAC, 60 Hertz incoming power
• 2 hp fixed speed models incorporate a starting & running capacitor, with internal bleed resistor, rated 370 Volt, 40 microfarad
• STP-SCI single phase smart controllers and STP-CBS single phase control boxes are available for 2 hp pump control
• Max. motor draw: 12 Amps.

Pump Motor

• 2 hp fixed speed, 3450 rpm, multi-stage centrifugal type pump motor with integral, automatic, thermal overload protection.
• Available in standard pressure (2-Stage) model, max. flow = 120 gpm, max. pressure = 36 psi.
• Available in high pressure (H200, 3-Stage) model, max. flow = 105 gpm, max pressure = 45 psi.
• Available with MagShell™ expanded shell which results in 45% increased flow area around motor.

Liquid Compatibility

• Max. liquid viscosity: 70 SSU @ 60°F (15°C)
• Standard STP (Non-AG) models are UL and cUL listed for fuel mixtures containing up to 15% ethanol or methanol, and 20% MTBE, 20% ETBE, or 17% TAME with gasoline.
• STPAG (alcohol-gasoline) models are UL and cUL listed for fuel mixtures containing up to 100% ethanol or methanol, and 20% MTBE, 20% ETBE, or 17% TAME with gasoline.
• 2 hp fixed speed models can also be used with diesel fuels, fuel oils, kerosene, Avgas, and jet fuels in a non-gelled pourable state.
• All wetted elastomers are made of a high grade, fluorocarbon viton compound.

Standard Features

• 2 hp fixed speed models are available in variable length and fixed length options.
• Check valve: 2 3/4 diameter fluorocarbon viton seal constructed on cast aluminum body and steel backing washer.
• Pressure relief valve: available in four pressure relief settings, integral to check valve. Standard model relieves at 40 psi and resets above 35 psi.
• Siphon: venturi type siphon primer supplied with every submersible. Siphon check valve and secondary siphon sold separately.
• Air eliminator: every submersible includes tank return path, with one-way check valve, to provide active air elimination
• Electrical disconnect: electrical yoke for positive contractor disconnect during service

Approvals

• 2 hp fixed speed models are UL and cUL listed.
• Consult factory for other applicable approvals.

Quality Certification

• Franklin Fueling Systems is an ISO 9001 certified manufacturer

Designation System

Click here to view the diagram.

A typical turbine model designation has up to five
components to define the pump being supplied as follows:
STP YYYYY A - B - C
STP = Basic Model Designation

YYYYY = Factory Installed Options
Model designations may include one or more of the
following characters in alphabetical order:
AG = alcohol-gasoline compatible
(100% ethanol or methanol capable) Note: Standard
models 0% to 15% ethanol or methanol capable
F = Floating suction adapter (1-1/2” NPT female adapter)
H = High pressure (45 psi deadhead output)
K = Intake filter screen (IFS, factory installed to PMA)
M = MagShell™ (flow enhancing expanded PMA shell)
*R = Model R check Valve
(24 psi relief / 22 psi reset for PLLD)
*W = Model W check Valve
(16 psi relief / 13 psi reset for PPM4000)

*Note: If not otherwise specified, all STP models supplied with
standard model check valve (40 psi relief / 35 psi reset for MLD &
LS300)

A = Pump Motor Horsepower Rating
200 = 2 hp fixed speed

B = Model Length**
VL1 = variable length range #1
VL2 = variable length range #2
VL3 = variable length range #3

**Note: VL2 models fit 94% of all known installations. See 2 hp fixed
speed model number tables for specific model length range details.

C = Riser Pipe Length
Note: Riser pipe length is expressed as two numeric characters that
indicate the total length of the riser in inches. Riser pipes are available
from 7” to 69” in one inch increments (add’l charge for risers 31” or
longer).

Ordering Information

1. Remove “M” from Model Number for non-MagShell Pump Motor Assembly.
2. Above models are UL and cUL listed for compatibility with fuel mixtures containing:
STP (Non-AG) = up to 15% Ethanol or Methanol with Gasoline, and 20% MTBE, 20% ETBE,or 17% TAME with Gasoline.
STPAG (Alcohol-Gasoline) = up to 100% Ethanol or Methanol with Gasoline, and 20% MTBE, 20% ETBE,
or 17% TAME with Gasoline.
3. All models are supplied with Standard Check Valve unless factory option “R” or “W” is specified.
4. All above models require Single Phase, 208-230 VAC, 60 Hertz incoming power
* Model Length (B) defined as the dimension from Turbine Manifold bottom to Pump Motor inlet.
** 4” Riser Pipe, if supplied locally, must be 4 1/2” OD by 3/16” wall thickness tubing.
*** For Riser Pipe lengths 31” to 69”, adder charge applies.

Factory Installed Options (specified in Model Number at time of IST order)

Field Installed Options
(2 hp Fixed Speed specific accessories)

Field Installed Options (2 hp Fixed Speed specific accessories)

*When purchasing STP-SCI or STP-DHI-SCI in equal quantities of Fixed Speed 4 inch STPs, the STP-SCI or STPDHI-
SCI will be invoiced at special discount pricing.