Sensor Alarm Console

Sensor Alarm Console

The S940 Sensor Alarm Console is a cost effective solution for tank overfill protection and sensor leak detection needs.

S940 Front Highlight.psd

STAND-ALONE OVERFILL & LEAK DETECTION

This easy-to-install-and-operate device monitors up to four tanks, containment sumps or interstitial spaces and provides an audible and visual indication of an alarm condition. Two programmable relay outputs are included to sound an external alarm or send a signal to a building control or monitoring system. The weatherproof enclosure allows the sensor alarm console to be conveniently installed indoors or out.

  • Simple to install and configure.

  • Can be installed indoors or outdoors.

  • Cost effective leak detection or overfill solution.

  • Connect to remote alarms or external devices.

General

  • Input channels: 4 (2-wire float switch sensor inputs)
  • Output channels: 2 (dry contact relay outputs)
  • Alarm: Internal audible alarm
  • LEDs: Alarm, power and output
  • Dimensions: 6" x 6" x 4"
  • Power requirements: 100-240 VAC +/- 10%, 50/60 Hz, 15 W max
  • Operating temperature: -13 to +140 ºF (-25 to +60 ºC)
  • Enclosure: NEMA® 4, indoor / outdoor (non-hazardous locations only)

Capabilities

  • Tank overfill alarm
  • Steel or fiberglass tank interstitial monitoring
  • Containment sump monitoring
  • General liquid sensor monitoring
  • Programmable relay outputs for remote alarm or external device interface
  • Compatible with the following sensors:
    • TSP-ULS universal liquid sensor
    • TSP-HLS high level sensor
    • TSP-HFS horizontal float switch
    • TSP-UHS universal hydrostatic sensor

Approvals/Certifications

  • UL, cUL, associated apparatus, non hazardous location
  • Third party certification of leak detection capabilities
Model Number Description
S940 Four channel sensor alarm console

Compatible Sensors

Model Number Description
TSP-ULS Universal liquid sump sensor (for use with S940 only)
TSP-UHS Universal hydrostatic sensor (for use with S940 only)
TSP-HLS-30 High product level sensor, 30" long, installed in tank (EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000 ATGs)
TSP-HLS-30/SS High product level sensor, stainless steel 30" long, installed in tanks containing alternative fuels (EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000 ATGs)
TSP-HLS-15 High product level sensor, 15" long, installed in tank (EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000 ATGs)
TSP-HLS-15/SS High product level sensor, stainless steel 15" long, installed in tanks containing alternative fuels (EVO™ 550, EVO™ 5000, EVO™ 600, EVO™ 6000 ATGs)

Drawings

Title Type Size
CD_FMS_S940_001.pdf PDF 0.04 MB
CD_FMS_S940_001.dwg DWG 0.27 MB