Combine a Defender Series® spill container, overfill prevention valve (OPVs), riser, cap, and adapter into a single part number and receive up to a 10% discount compared to purchasing all components separately.
The Defender Series® remote fill splice kit allows you to modify a standard drop tube for remote fill applications.
The UHS uses float switch technology to continuously monitor liquid-filled double wall containment sumps. Normally submerged, the single float UHS will provide an indication if there is a loss of monitoring liquid.
Installing APT™ brand XP flexible pipe inside of a narrow-base dispenser sump has never been easier. The XP pipe clamshell tee and elbow fittings allow for an easy space-saving installation by enabling an installer to connect flexible pipe directly into a shear valve riser. This eliminates the need for extra galvanized fittings. By eliminating the galvanized fittings, you also reduce the amount of potential leak points, giving you peace of mind that your installation is secure. With the tee and elbow fittings you can complete an XP pipe installation inside of a sump in less than 16” of linear space. The stainless steel design of the fittings makes them an ideal solution for any fueling application.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe.
As part of the CableTight™ Wire Management System, the Direct Bury System is ideal for applications where cables of 5 mm to 16 mm diameter are directly buried in the ground (such as grounding wires and armored power cables).
Steel Manway Covers are available in round or square options, 18" and 24" diameters, and are engineered and tested to meet or exceed H20 and HS20 load ratings.
The 9000 Mini-Jet is a non-electric central vacuum pump that uses the product flow of a submersible turbine pump to create a vacuum for vapor recovery. One Mini-Jet can handle eight fueling positions with four nozzles in simultaneous full flow operation. Additional Mini-Jet can be added for larger sites. Provides high reliability and low maintenance. High vacuum level assures clearing of flooded vapor hoses.
The EBW automatic bulk fueling nozzle is an extra heavy duty, high flow fuel dispensing nozzle designed for bulk fuelling operations such as marine/truck/bus dispensing or home fuel oil delivery. This nozzle comes complete with automatic venturi shut-off and a dual position, hold-open mechanism.
The DC400 Dispensing Cutoff System is a stand-alone, solid state two-part system which includes a controller and sensor, designed to automatically shut down product flow if liquid is detected inside containment spaces. Ideal for retrofit applications, the DC400 allows for easy compliance with new and evolving regulations, without the added expenses of shutting down your site to break concrete for new conduit and wiring installation. The DC400 can be mounted inside any turbine sump to provide complete pump shut down or mounted directly into dispenser sumps, allowing only the effected dispenser to be shut down as liquid is detected.