The EBW™ brand 498 Series manual nozzle has a cast aluminum body, and stainless steel stem for trouble-free service and easy operation. In addition, this nozzle’s high flow, minimum pressure loss and excellent throttling characteristics provide fast and accurate deliveries with top-off control.
FLEX-ING™ brand AGRI-FLEX™ farm hose is a multi-use type hose for dispensing gasoline, grease, kerosene and petroleum oils from farm and barrel-type pumps. This hose features an integrated static wire and is ideal for agricultural, construction and industrial service applications where UL approval is not required.
The FLEX-ING™ brand DuraDEF™ nozzle features a specially encapsulated aluminum casting which is lightweight yet completely DEF/AdBlue® compatible. It provides the performance and construction specifications required for DEF/AdBlue® delivery in a familiar, user-friendly design. This nozzle features a mis-fill prevention spout that prevents DEF from being dispensed unless the spout is engaged with a miss-fill prevention device (MPD). The MPD is available separately.
The PV-ZERO pressure/vacuum vent valve from Franklin Fueling Systems provides an innovative solution for tank venting needs. The patented liquid trap design utilizes vapor pressure to provide positive and negative pressure relief of an underground storage tank. The stainless steel design allows the PV-ZERO to be compatible with both gasoline and E85.
FLEX-ING™ brand hose retrievers are used to keep excess hose raised off the ground at sites which typically use long hoses such as truck refueling sites. The hose retriever prevents safety hazards, kinks, tangles and prolongs the life of the hose. Combine the hose retriever with the hose retriever base plate and hose support for a complete hose retriever system.
Use this Vapor Check Valve to return vapor to the truck during terminal loading and service station drops. The 3" poppet opens when coupled and closes when disconnected, preventing the vapors from escaping into the atmosphere. The valve has 3" or 4" female NPSM threads, a 4" cam and groove, and tapped mounting holes for the EBW Air Interlock Brake. The 303 series is available without a poppet to serve as a male quick coupler with an Air Interlock Valve mounting pad.
This durable 22" tall product elbow was designed for those deep tank burial applications and has a high flow rate as a result of the unrestricted flow pattern. It fits all 4-inch top seal adapters and can also be ordered with a variety of different adapters to meet any requirement. The single four bolt flange design allows for easy replacement of adapters over competitive threaded styles and is designed for extremely easy on- and off-coupling as a result of aluminum bronze alloy docking.
The high capacity mechanical leak detector is capable of detecting leaks of 3 gph (11.4 lph) or greater at 10 psi (69 kpa). Its compact design allows installation in the same containment sump as the submersible pump, greatly reducing the amount of unprotected leak points between the submersible and the mechanical leak detector.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe.