EBW® Steel Knock Down Manways feature a 3/8" diamond back steel plate cover with a galvanized steel skirt. Covers available in 16" × 16" and 24" × 24" dimensions, engineered and tested to meet or exceed H20 and HS20 load ratings, and each is individually boxed with skirt in knock down form for easy handling and storing.
Available as a factory installed option on STPAG and IST biofuel compatible submersible turbine pumps (STPs), Corrosion Control™ Advanced Protection defends STPs from accelerated corrosion.
Because DEF will freeze at around 12° F (-11° C), no DEF system is complete without a means to prevent it from freezing in the lines. When temperatures drop, EVO™ recirculates the fluid – preventing it from freezing in the lines.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 305 allow for EIF welding. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
The PRO® Connect Web Browser interface allows you to securely connect directly to your EVO™ Series console's from any web enabled device. It automatically scales for tablets and smart phones, meaning no app to download.
By connecting to the site’s emergency stop system, Ethernet Primary Dispenser Disconnects provide low voltage disconnection for dispensers that use Ethernet network cabling for primary dispenser communication. Models are available that will disconnect 1 or 2 Ethernet cables for 8 dispensers or disconnect one Ethernet cable for 16 dispensers.
Available with either 3 Hp or 5 Hp, the FE PETRO® High Capacity Submersible Turbine Pumps. (STPs) deliver efficient, reliable and quiet performance when high volumes or high speed deliveries of gasoline or diesel fuel are required.
The HLS level sensor is an overfill prevention switch that may be adjusted to operate over a wide range of levels. The HLS is based on float-switch technology and is made of chemical-resistant materials to assure compatibility with most liquids.
Defender Series® Pressure/Vacuum (P/V) vents regulate the pressure at which vapor is allowed to escape from the underground storage tank and the vacuum at which outside air is allowed to enter the tank. The P/V vent’s internal rolling diaphragm delivers consistent and controlled cracking for both low leak and high-pressure conditions while the superior construction of UV-resistant materials extends the overall service life. The in-line vault provides added protection and facilitates at-grade servicing and testing. This eliminates the added expense of lift trucks as well as the potential safety concerns of conducting work at height.
The DIS installs in the interstitial space of steel and fiberglass double wall tanks and sumps and detects the presence of various liquids in tanks as well as sumps and other locations.