These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 305 allow for EIF welding. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
Vented installation kit for use with the FMP-HIS-U or FMP-HIS XL-U sensor installed in a 4" (10 cm) reservoir opening on double wall fiberglass tanks. The cap is compression-fit into the riser pipe via the use of a lever.
Installation kit for installing the DIS, EIS or ULS sensors in dry interstitial spaces with 2" (5 cm) riser pipe openings. The cap is compression-fit into the riser pipe via the use of a lever.
Let gravity do all the work with these high strength, corrosion-resistant adapters. A 22.5 degree angle makes service station drops a breeze with easy hose coupling and fast, unrestricted off-loading. Engineered to mate with API RP 1004 Bottom Loading Adapters, each adapter comes with a heavy-duty attachment chain and uses a large, resilient gasket that guarantees minimum product loss. The lightweight adapters are available in 3" male NPT or male cam and groove; 4" male NPT, male cam and groove or female cam and groove.
As part of the Corrosion Control™ System the Corrosion Detection Sensor (CDS) provides automated notification of a corrosive environment in the tank ullage space. This notification helps keep the fuel system running at peak performance and avoid costly maintenance, equipment replacement, downtime, and system failure caused by excessive corrosion.
The EVO™ 600 and EVO™ 6000 are compatible with the Corrosion Control™ Water Separator and Corrosion Detection Sensor, allowing owners to fully automate the removal of corrosion-causing water from tanks and monitor for corrosive environments.
Available with either 3 Hp or 5 Hp, the FE PETRO® High Capacity Submersible Turbine Pumps. (STPs) deliver efficient, reliable and quiet performance when high volumes or high speed deliveries of gasoline or diesel fuel are required.
EVO™ LLD is a stand-alone precision electronic line leak detection solution designed to provide early detection of leaks in fuel lines. The system features automatic submersible pump shutdown in the event of a leak, minimizing the risks of costly spills and environmental cleanup.
APT™ brand split test boots are designed to make the integrity testing of secondary contained XP Flexible Piping simple and easy. For use on both new or existing sites, these boots feature a hinged design that allows you to clamp the boot down over the pipe after it has been installed. The boot locks itself in position between the primary and secondary pipe layers using the stainless steel clamp.
Available as a factory installed option on STPAG and IST biofuel compatible submersible turbine pumps (STPs), Corrosion Control™ Advanced Protection defends STPs from accelerated corrosion.