The Defender Series®™ Multiport Manways include the Defender Series® Spill Containers and feature the patented watertight sealing system. Available in both 36" and 42" models with a variety of configurations to meet the needs of any application.
The DC4830 is of bolted construction at the riser/base joint which will give a joint of the same quality as that to the tank for a fully watertight seal.
The HEALY™ 800 Series Onboard Refueling Vapor Recovery (ORVR) nozzle converts any new or existing dispenser to a CARB certified system for ORVR compatibility. The smart interface design will automatically detect whether a vehicle is equipped with ORVR to prevent over-pressurization caused by clean air being pulled back into the storage tank. Available for use outside of the United States.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 305 allow for EIF welding. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
FE PETRO® diesel exhaust fluid pump motor assemblies (PMAs) feature a stainless steel close-coupled design powered by a field-proven Franklin Electric motor and designed specificaly for DEF/AdBlue® applications.
PHIL-TITE™ multiport manways provide watertight access to spill containers for the filling of underground storage tanks. Available in a variety of sizes and configurations, the PHIL-TITE™ multiport manway design allows sump shield removal for regular maintenance or inspection without having to unthread and remove the spill containers. This is a key feature for markets that require costly permitting, site closure, and testing if the vapor space is broken by removing spill containers.
Simplify ordering by combining all of your multiport equipment needs into a single part number. PHIL-TITE™ multiport manway packages combine everything you need for safe and effective Phase 1 Enhanced Vapor Recovery (EVR), including the multiport manway, fill and vapor spill containers, fill and vapor swivel adapters and caps, sump shield, and overfill prevention valve. The PHIL-TITE™ multiport manway design allows sump shield removal for regular maintenance or inspection without having to unthread and remove the spill containers. This is a key feature for markets that require costly permitting, site closure, and testing if the vapor space is broken by removing spill containers.