Large Mouth

Large Mouth

APT® Large Mouth Polyethylene Dispenser Sumps feature a two-piece modular design and large sump opening to provide easy installation and ample space for under dispenser containment. With a variety of sump lengths, two depth options, an assortment of top frame options, and field height adjustability, there is a solution to match virtually any application and provide complete compatibility with the industry's most popular dispenser models.

  • The ribbed riser can be cut down in 3" increments in the field to adjust sump heigh and achieve proper pipe slopes with respect to grade.
  • Available in medium (28") and deep(43") burial depths to properly maintain slope.
  • 22" wide by 24", 36" or 48" long opening on base gives plenty of room for boot, fitting and monitor installation.
  • Available in medium and deep burial depths to properly maintain slope.
  • The base widens to a spacious 26" where entry boots and pipe connections are made.
  • Height modifications are accomplished by trimming off the base at the ribs.
  • Stabilizer bar kits (SBKs) mount into welded strut channels for shear valve mounting. One SBK is required for each shear valve and must be purchased separately.

Approvals/Certifications

  • ULc listed.
  • Florida EQ-423 approved.

Large Mouth Polyethylene Dispenser Sumps - UL

Use the drawing diagram and the dimensions below to identify the appropriate dispenser sump for your application.

Model Top Frame Mouth Length (A) Top Frame Mouth Depth (B) Sump Base Mouth Length (C) Sump Base Bottom Length (D) Sump Base Height (E)
Medium (M)
Sump Pase Height (E)
Deep (D)
Sump Base Mouth Depth (F) Sump Base Bottom Depth (G) Sump Base Bottom Height (H)

LM(M/D)-1410

13.50" 9.75" 24.00" 28.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-1913-T

19.00" 12.00" 24.00" 28.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-2010

20.50" 10.00" 24.00" 28.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-2018

20.81" 18.31" 24.00" 28.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-2313-T

23.00" 12.00" 36.00" 40.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-2407

23.75" 7.50" 36.00" 40.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-2715

27.00" 15.00" 36.00" 40.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-2811

28.50" 11.00" 36.00" 40.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-2915

29.75" 15.75" 36.00" 40.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LMM-2915-HLX*

29.75" 15.25" 36.00" 40.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-3610

36.00" 10.25" 48.00" 52.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-3617*

36.00" 17.25" 36.00" 40.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-3914-36-W*

38.75" 14.00" 36.00" 40.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-3914

38.75" 14.00" 48.00" 52.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LMM-3915-HLX*

39.75" 15.25" 48.00" 52.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-4018

39.75" 17.75" 48.00" 52.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-4111

41.50" 11.00" 48.00" 52.00" 28.00" 43.00" 22.00" 26.00" 15.50"

LM(M/D)-4115

41.50" 15.75" 48.00" 52.00" 28.00" 43.00" 22.00" 26.00" 15.50"

Note: For “M/D” in part number use “M” for medium or “D” for deep when ordering.

*Conduit-less top frame.

Large Mout Poly Dispenser Sumps - Dims.psd

Large Mouth Polyethylene Dispenser Sumps Base Only - UL

Use the drawing diagram and the dimensions below to identify the appropriate dispenser sump for your application.

Model Sump Base Mouth Length (C) Sump Base Bottom Length (D) Sump Pase Height (E) Sump Base Mouth Depth (F) Sump Base Bottom Depth (G) Sump Base Bottom Height (H)
LBM-2400 24.00" 28.00" 28.00" 22.00" 26.00" 15.50"
LBM-3600 36.00" 40.00" 28.00" 22.00" 26.00" 15.50"
LBM-4800 48.00" 52.00" 28.00" 22.00" 26.00" 15.50"
LBD-2400 24.00" 28.00" 43.00" 22.00" 26.00" 15.50"
LBD-3600 36.00" 40.00" 43.00" 22.00" 26.00" 15.50"
LBD-4800 48.00" 52.00" 43.00" 22.00" 26.00" 15.50"

 

Large Mout Poly Dispenser Sumps Body - Dims.psd

Large Mouth Polyethylene Dispenser Sumps Top Frame Only - UL

Use the drawing diagram and the dimensions below to identify the appropriate frame for your application.

Model Top Frame Mouth Length (A) Top Frame Mouth Depth (B) Sump Base Size
LMT-1410 13.50" 9.75" 2400
LMT-1913-T 19.00" 12.00" 2400
LMT-2010 20.50" 10.00" 2400
LMT-2018 20.81" 18.31" 2400
LMT-2313-T 23.00" 12.00" 3600
LMT-2407 23.75" 7.50" 3600
LMT-2715 27.00" 15.00" 3600
LMT-2811 28.50" 11.00" 3600
LMT-2915 29.75" 15.75" 3600
LMT-2915-HLX 29.75” 15.25” 3600
LMT-3610 36.00" 10.25" 4800
LMT-3617-36 36.00" 17.25" 3600
LMT-3914-36-W 38.75" 14.00" 3600
LMT-3914 38.75" 14.00" 4800
LMT-3915-HLX 39.75" 15.25" 4800
LMT-4018 39.75" 17.75" 4800
LMT-4111 41.50" 11.00" 4800
LMT-4115 41.50" 15.75" 4800

 

Large Mout Poly Dispenser Sumps Top Frame - Dims.psd

Stabilizer Bar Kits

One SBK is required for each shear valve and must be purchased separately. Select the appropriate SBK with the compatibility chart below.

Sump Model Stabilizer Bar Kit Model
LM(M/D)-1410 SBK-2
LM(M/D)-1913-T SBK-25
LM(M/D)-2010 SBK-2
LM(M/D)-2018 SBK-3
LM(M/D)-2313-T SBK-25
LM(M/D)-2407 SBK-1
LM(M/D)-2715 SBK-3
LM(M/D)-2811 SBK-25
LM(M/D)-2915 SBK-3
LMM-2915-HLX SBK-3
LM(M/D)-3610 SBK-2
LM(M/D)-3617 SBK-3
LM(M/D)-3914-36-W SBK-25
LM(M/D)-3914 SBK-3
LMM-3915-HLX SBK-3
LM(M/D)-4018 SBK-3
LM(M/D)-4111 SBK-25
LM(M/D)-4115 SBK-3

Large Mouth Polyethylene Dispenser Sumps - UL

Use the drawing diagram and the dimensions under Specifications to identify the appropriate dispenser sump for your application.

Model Number Description
LMD-1410 Dispenser sump, Polyethylene, Deep burial, 13.5″ x 9.75″
LMD-1913-T Dispenser sump, Polyethylene, Deep burial, 19″ x 12″, Tokheim®
LMD-2010 Dispenser sump, Polyethylene, Deep burial, 20.5″ x 10″
LMD-2018 Dispenser sump, Polyethylene, Deep burial, 20.8″ x 18.3″
LMD-2313-T Dispenser sump, Polyethylene, Deep burial, 23″ x 12″, Tokheim®
LMD-2407 Dispenser sump, Polyethylene, Deep burial, 23.75″ x 7.5″
LMD-2715 Dispenser sump, Polyethylene, Deep burial, 27″ x 15″
LMD-2811 Dispenser sump, Polyethylene, Deep burial, 28.5″ x 11″
LMD-2915 Dispenser sump, Polyethylene, Deep burial, 29.75″ x 15.75″
LMD-3610 Dispenser sump, Polyethylene, Deep burial, 36″ x 10.25″
LMD-3617 Dispenser sump, Polyethylene, Deep burial, 36″ x 17.25″, Conduit-less top frame.
LMD-3914 Dispenser sump, Polyethylene, Deep burial, 38.75″ x 14″
LMD-3914-36-W Dispenser sump, Polyethylene, Deep burial, 38.75″ x 14″, for 36” sump, Conduit-less top frame.
LMD-4018 Dispenser sump, Polyethylene, Deep burial, 39.75″ x 17.25″
LMD-4111 Dispenser sump, Polyethylene, Deep burial, 41.5″ x 11″
LMD-4115 Dispenser sump, Polyethylene, Deep burial, 41.5″ x 15.75″
LMM-1410 Dispenser sump, Polyethylene, Medium burial, 13.5″ x 9.75″
LMM-1913-T Dispenser sump, Polyethylene, Medium burial, 19″ x 12″, Tokheim®
LMM-2010 Dispenser sump, Polyethylene, Medium burial, 20.5″ x 10″
LMM-2018 Dispenser sump, Polyethylene, Medium burial, 20.8″ x 18.3″
LMM-2313-T Dispenser sump, Polyethylene, Medium burial, 23″ x 12″, Tokheim®
LMM-2407 Dispenser sump, Polyethylene, Medium burial, 23.75″ x 7.5″
LMM-2715 Dispenser sump, Polyethylene, Medium burial, 27″ x 15″
LMM-2811 Dispenser sump, Polyethylene, Medium burial, 28.5″ x 11″
LMM-2915 Dispenser sump, Polyethylene, Medium burial, 29.75″ x 15.75″
LMM-2915-HLX Dispenser sump, Polyethylene, Medium burial, 29.75″ x 15.75″, Wayne® Helix, Conduit-less top frame.
LMM-3610 Dispenser sump, Polyethylene, Medium burial, 36″ x 10.25″
LMM-3617 Dispenser sump, Polyethylene, Medium burial, 36″ x 17.25″, Conduit-less top frame.
LMM-3914 Dispenser sump, Polyethylene, Medium burial, 38.75″ x 14″
LMM-3914-36-W Dispenser sump, Polyethylene, Medium burial, 38.75″ x 14″, for 36” sump, Conduit-less top frame.
LMM-3915-HLX Dispenser sump, Polyethylene, Medium burial, 39.75″ x 15.75″, Wayne® Helix, Conduit-less top frame.
LMM-4018 Dispenser sump, Polyethylene, Medium burial, 39.75″ x 17.25″
LMM-4111 Dispenser sump, Polyethylene, Medium burial, 41.5″ x 11″
LMM-4115 Dispenser sump, Polyethylene, Medium burial, 41.5″ x 15.75″

Large Mouth Polyethylene Dispenser Sumps Base Only - UL

Use the drawing diagram and the dimensions under Specifications to identify the appropriate dispenser sump base for your application.

Model Number Description
LBM-2400 24″ Large Mouth Base, Medium burial.
LBM-3600 36″ Large Mouth Base, Medium burial.
LBM-4800 48″ Large Mouth Base, Medium burial.
LBD-2400 24″ Large Mouth Base, Deep burial.
LBD-3600 36″ Large Mouth Base, Deep burial.
LBD-4800 48″ Large Mouth Base, Deep burial.

Large Mouth Polyethylene Dispenser Sumps Top Frame Only - UL

Use the drawing diagram and the dimensions under Specifications to identify the appropriate top frame for your application.

Model Number Description
LMT-1410 Large Mouth Top Frame Assembly, 13.5″ x 9.75″
LMT-1913-T Large Mouth Top Frame Assembly, 19″ x 12″, Tokheim®
LMT-2010 Large Mouth Top Frame Assembly, 20.5″ x 10″
LMT-2018 Large Mouth Top Frame Assembly, 20.8″ x 18.3″
LMT-2313-T Large Mouth Top Frame Assembly, 23″ x 12″, Tokheim®
LMT-2407 Large Mouth Top Frame Assembly, 23.75″ x 7.5″
LMT-2715 Large Mouth Top Frame Assembly, 27″ x 15″
LMT-2811 Large Mouth Top Frame Assembly, 28.5″ x 11″
LMT-2915 Large Mouth Top Frame Assembly, 29.75″ x 15.75″
LMT-2915-HLX Large Mouth Top Frame Assembly, 29.75″ x 15.75″, Wayne® Helix
LMT-3610 Large Mouth Top Frame Assembly, 36″ x 10.25″
LMT-3617-36 Large Mouth Top Frame Assembly, 36″ x 17.25″
LMT-3914-36-W Large Mouth Top Frame Assembly, 38.75″ x 14″, For 36″ sump, Conduit-less top frame.
LMT-3914 Large Mouth Polyethylene Dispenser Top Frame Only
LMT-3915-HLX Large Mouth Top Frame Assembly, 39.75″ x 15.75″, Wayne® Helix
LMT-4018 Large Mouth Top Frame Assembly, 39.75″ x 17.25″
LMT-4111 Large Mouth Top Frame Assembly, 41.5″ x 11″
LMT-4115 Large Mouth Top Frame Assembly, 41.5″ x 15.75″

Grommets for Conduit-less Sumps

Model Description

43605002

½" grommets for conduit-less sump

43607502

¾" grommets for conduit-less sump

43610002

1" grommets for conduit-less sump

Large Mouth Fiberglass Dispenser Sumps - EN

Model Number Description
LMM-2010-D Large Mouth Fiberglass Dispenser Sump, Double Wall, 20″ X 10.5″
LMM-2010-S Large Mouth Fiberglass Dispenser Sump, Single Wall, 20″ X 10.5″
LMM-2915-D Large Mouth Fiberglass Dispenser Sump, Double Wall, 29.75″ X 15.75″
LMM-2915-S Large Mouth Fiberglass Dispenser Sump, Single Wall, 29.75″ X 15.75″
LMM-4111-D Large Mouth Fiberglass Dispenser Sump, Double Wall, 41.5″ x 11″
LMM-4111-S Large Mouth Fiberglass Dispenser Sump, Single Wall, 41.5″ x 11″
LMM-4115-D Large Mouth Fiberglass Dispenser Sump, Double Wall, 41.5″ x 15.75”
LMM-4115-S Large Mouth Fiberglass Dispenser Sump, Single Wall, 41.5″ x 15.75”

Stabiliser Bar Kit - EN

Model Number Description
SBK-2 Stabiliser Bar Kit for 2010
SBK-25 Stabiliser Bar Kit for 4111
SBK-3 Stabiliser Bar Kit for 2915 & 4115

Drawings

Title Type Size
CD_PC_LMM-4716-TOK_002.pdf PDF 0.26 MB
CD_PC_LMM-4716-TOK_002.dwg DWG 0.64 MB
CD_PC_LMM-4113_001.pdf PDF 0.04 MB
CD_PC_LMM-4113_001.dwg DWG 0.36 MB
CD_PC_LMM-4109_001.pdf PDF 0.04 MB
CD_PC_LMM-4109_001.dwg DWG 0.37 MB
CD_PC_LMM-3915-HLX_001.pdf PDF 0.04 MB
CD_PC_LMM-3915-HLX_001.dwg DWG 0.32 MB
CD_PC_LMM-3914-36-X_001.pdf PDF 0.02 MB
CD_PC_LMM-3914-36-X_001.dwg DWG 0.32 MB
CD_PC_LMM-3914-36_001.pdf PDF 0.04 MB
CD_PC_LMM-3914-36_001.dwg DWG 0.37 MB
CD_PC_LMM-3617-DEF_001.pdf PDF 0.03 MB
CD_PC_LMM-3617-DEF_001.dwg DWG 0.26 MB
CD_PC_LMM-3513-TOK_001.pdf PDF 0.04 MB
CD_PC_LMM-3513-TOK_001.dwg DWG 0.45 MB
CD_PC_LMM-3109_001.pdf PDF 0.05 MB
CD_PC_LMM-3109_001.dwg DWG 0.39 MB
CD_PC_LMM-2916-DEF-O2-SAT_001.pdf PDF 0.1 MB
CD_PC_LMM-2916-DEF-O2-SAT_001.dwg DWG 0.32 MB
CD_PC_LMM-2916-DEF-O2_001.pdf PDF 0.03 MB
CD_PC_LMM-2916-DEF-O2_001.dwg DWG 0.14 MB
CD_PC_LMM-2916-DEF_001.pdf PDF 0.03 MB
CD_PC_LMM-2916-DEF_001.dwg DWG 0.15 MB
CD_PC_LMM-2915-HLX_001.pdf PDF 0.03 MB
CD_PC_LMM-2915-HLX_001.dwg DWG 0.4 MB
CD_PC_LMM-2913_002.pdf PDF 0.04 MB
CD_PC_LMM-2913_002.dwg DWG 0.42 MB
CD_PC_LMM-2518_001.pdf PDF 0.04 MB
CD_PC_LMM-2518_001.dwg DWG 0.19 MB
CD_PC_LMM-2409_001.pdf PDF 0.04 MB
CD_PC_LMM-2409_001.dwg DWG 0.17 MB
CD_PC_LMM-2212-24_001.pdf PDF 0.04 MB
CD_PC_LMM-2212-24_001.dwg DWG 0.35 MB
CD_PC_LMM-2212_001.pdf PDF 0.04 MB
CD_PC_LMM-2212_001.dwg DWG 0.18 MB
CD_PC_LMM-1710_001.pdf PDF 0.04 MB
CD_PC_LMM-1710_001.dwg DWG 0.43 MB
CD_PC_LMD-4716-TOK_001.pdf PDF 0.04 MB
CD_PC_LMD-4716-TOK_001.dwg DWG 0.67 MB
CD_PC_LMD-4115_002.pdf PDF 0.04 MB
CD_PC_LMD-4115_002.dwg DWG 0.19 MB
CD_PC_LMD-4113_001.pdf PDF 0.04 MB
CD_PC_LMD-4113_001.dwg DWG 0.44 MB
CD_PC_LMD-4111_002.pdf PDF 0.04 MB
CD_PC_LMD-4111_002.dwg DWG 0.21 MB
CD_PC_LMD-4109_001.pdf PDF 0.05 MB
CD_PC_LMD-4109_001.dwg DWG 0.42 MB
CD_PC_LMD-4018_001.pdf PDF 0.05 MB
CD_PC_LMD-4018_001.dwg DWG 0.46 MB
CD_PC_LMD-3914-36_001.pdf PDF 0.05 MB
CD_PC_LMD-3914-36_001.dwg DWG 0.4 MB
CD_PC_LMD-3914_001.pdf PDF 0.05 MB
CD_PC_LMD-3914_001.dwg DWG 0.41 MB
CD_PC_LMD-3617_002.pdf PDF 0.04 MB
CD_PC_LMD-3617_002.dwg DWG 0.38 MB
CD_PC_LMD-3610_001.pdf PDF 0.04 MB
CD_PC_LMD-3610_001.dwg DWG 0.39 MB
CD_PC_LMD-3513-TOK_001.pdf PDF 0.04 MB
CD_PC_LMD-3513-TOK_001.dwg DWG 0.68 MB
CD_PC_LMD-3109_001.pdf PDF 0.05 MB
CD_PC_LMD-3109_001.dwg DWG 0.47 MB
CD_PC_LMD-2915_002.pdf PDF 0.04 MB
CD_PC_LMD-2915_002.dwg DWG 0.18 MB
CD_PC_LMD-2913_002.pdf PDF 0.04 MB
CD_PC_LMD-2913_002.dwg DWG 0.64 MB
CD_PC_LMD-2811_001.pdf PDF 0.05 MB
CD_PC_LMD-2811_001.dwg DWG 0.43 MB
CD_PC_LMD-2715_001.pdf PDF 0.04 MB
CD_PC_LMD-2715_001.dwg DWG 0.42 MB
CD_PC_LMD-2518_001.pdf PDF 0.04 MB
CD_PC_LMD-2518_001.dwg DWG 0.49 MB
CD_PC_LMD-2409_001.pdf PDF 0.04 MB
CD_PC_LMD-2409_001.dwg DWG 0.4 MB
CD_PC_LMD-2407_001.pdf PDF 0.04 MB
CD_PC_LMD-2407_001.dwg DWG 0.44 MB
CD_PC_LMD-2313-T_001.pdf PDF 0.04 MB
CD_PC_LMD-2313-T_001.dwg DWG 0.44 MB
CD_PC_LMD-2212-24_001.pdf PDF 0.04 MB
CD_PC_LMD-2212-24_001.dwg DWG 0.44 MB
CD_PC_LMD-2212_001.pdf PDF 0.04 MB
CD_PC_LMD-2212_001.dwg DWG 0.19 MB
CD_PC_LMD-2018_001.pdf PDF 0.04 MB
CD_PC_LMD-2018_001.dwg DWG 0.46 MB
CD_PC_LMD-2010_002.pdf PDF 0.05 MB
CD_PC_LMD-2010_002.dwg DWG 0.17 MB
CD_PC_LMD-1913-T_001.pdf PDF 0.04 MB
CD_PC_LMD-1913-T_001.dwg DWG 0.44 MB
CD_PC_LMD-1710_001.pdf PDF 0.04 MB
CD_PC_LMD-1710_001.dwg DWG 0.41 MB
CD_PC_LMD-1410_001.pdf PDF 0.04 MB
CD_PC_LMD-1410_001.dwg DWG 0.39 MB
CD_SSH_43610002_001.pdf PDF 0.1 MB
CD_SSH_43610002_001.dwg DWG 0.3 MB
CD_SSH_43607502_001.pdf PDF 0.1 MB
CD_SSH_43607502_001.dwg DWG 0.31 MB
CD_SSH_43605002_001.pdf PDF 0.1 MB
CD_SSH_43605002_001.dwg DWG 0.3 MB