These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 308 allow a second boot to be fitted to the outside as a gravel guard. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
Variable speed pumping systems, powered by Guardian Series™ Variable Frequency Controllers, ramp up the system's horsepower as needed to provide optimal flow rates at fueling points. The result is faster and more consistent flow rates at peak business times compared to fixed speed systems. By incorporating features such as precise flow control, fault diagnostics, and protective mechanisms, the Variable Frequency Controller enhances operational performance, reduces maintenance costs, and extends equipment lifespan.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe.
Available in either 42" or 48" diameters, fiberglass tank sump collars allow for watertight installation of tank sumps to the top of the tank.
UPP® pipework utilizes the advanced electrofusion welding process to effectively bond system components including pipework and containment together into one, watertight system. UL UPP® pipe is offered in 1½", 2", 3", and 4" diameters and a variety of stick and coil sizes. EN UPP® pipe is offered in 32mm, 50mm, 63mm, 90mm, 110mm, and 160mm diameters and a variety of stick and coil sizes.
Used to install, service, and test Defender Series® overfill prevention valves.
Let gravity do all the work with these high strength, corrosion-resistant adapters. A 22.5 degree angle makes service station drops a breeze with easy hose coupling and fast, unrestricted off-loading. Engineered to mate with API RP 1004 Bottom Loading Adapters, each adapter comes with a heavy-duty attachment chain and uses a large, resilient gasket that guarantees minimum product loss. The lightweight adapters are available in 3" male NPT or male cam and groove; 4" male NPT, male cam and groove or female cam and groove.
The EBW 325 product line isolation valve (PLIV) is designed to be installed at the top of the underground storage tank fuel line fitting on suction systems, or at the output of the submersible pump in a remote system. This provides a means of sealing off the tank for precision line testing without breaking pipe connections. The 325 PLIV can also be used for vapor line tank isolation on suction systems.
All-In-One Dispenser Disconnects offer a flexible approach to disconnecting low voltage circuits including, data, credit cards, intercom/communication, and video/media circuit conductors connected to dispensers. Primary and secondary disconnects for both twisted pair and Ethernet circuits are combined into one space-saving, pre-configured enclosure.