Because DEF will freeze at around 12° F (-11° C), no DEF system is complete without a means to prevent it from freezing in the lines. When temperatures drop, EVO™ recirculates the fluid – preventing it from freezing in the lines.
Variable speed pumps are controlled by the VFC™ variable frequency controller which provides control for both 2 Hp and 4 Hp variable speed submersible turbine pumps.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 305 allow for EIF welding. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
Available with either 3 Hp or 5 Hp, the FE PETRO® High Capacity Submersible Turbine Pumps. (STPs) deliver efficient, reliable and quiet performance when high volumes or high speed deliveries of gasoline or diesel fuel are required.
The AST above or below ground transition sump is the practical, environmentally sound solution for remote dispensing from aboveground storage tanks. Steel and flexible piping enter the sump through the APT flexible entry boot. Inside the sump, the steel piping easily connects to flexible piping for a fueltight, continuous run to dispensers or an intermediate sump.
CARB EVR approved 4" probe riser cap is used to protect tank probes and secure probe or monitoring sensor connections. The easy-to-operate T-handle provides a convenient method of removal and replacement. The 90037 adapter kit includes a 4" nylon cap with 1/2" cable bushing and a 4" composite adapter.
The E-85 Ethanol Hose is designed for dispensing applications with ethanol blends up to 85%. These hoses feature an abuse-resistant, solid wire braid construction that prevents kinking and assures a long service life and minimal maintenance.
FLEX-ING™ brand AGRI-FLEX™ farm hose is a multi-use type hose for dispensing gasoline, grease, kerosene and petroleum oils from farm and barrel-type pumps. This hose features an integrated static wire and is ideal for agricultural, construction and industrial service applications where UL approval is not required.
Accessories for fill point vapor recovery including coxial applications.