A variety of inventory control and leak detection float kits for various applications.
FLEX-ING™ brand hose retrievers are used to keep excess hose raised off the ground at sites which typically use long hoses such as truck refueling sites. The hose retriever prevents safety hazards, kinks, tangles and prolongs the life of the hose. Combine the hose retriever with the hose retriever base plate and hose support for a complete hose retriever system.
This durable 22" tall product elbow was designed for those deep tank burial applications and has a high flow rate as a result of the unrestricted flow pattern. It fits all 4-inch top seal adapters and can also be ordered with a variety of different adapters to meet any requirement. The single four bolt flange design allows for easy replacement of adapters over competitive threaded styles and is designed for extremely easy on- and off-coupling as a result of aluminum bronze alloy docking.
UPP® steel electrofusion entry seals weld directly to the walls of steel chambers and underground dispenser containment. They provide a water tight seal between UPP® primary or secondary contained pipe and steel underground containment. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system.
The DC4830 is of bolted construction at the riser/base joint which will give a joint of the same quality as that to the tank for a fully watertight seal.
EBW™ brand monitoring well cap plugs expand on the inside diameter of the screen pipe casing to form a vapor and watertight seal. An integrated locking mechanism prevents unauthorized access. The locking mechanism features a captured bolt, eliminating potential drop-out. The cap is a distinctive yellow color and features the words "Do Not Fill - Monitor Well" which is molded into the cap.
Ball float vent valves are used in conjunction with extractor vent valves in the Stage I vapor riser or tank vent lines on underground storage tanks. The ball float vent valve will restrict vapor venting should a full tank condition occur and protects against product mixing and vapor locks due to vent pipe flooding. The valve includes a brass installation cage that will fit all EBW® extractor vent fittings. All ball floats are fully compatible with alcohol/gas blends and biofuels (E-85, Biodiesel, B-20). WARNING: 308 Series float vents should not be used with suction pump systems. For use on gravity drop systems only. Do not use with pump-off unloading. Do not use with coaxial Stage I vapor recovery drop tubes.
Angle check valves are used on suction system fuel lines to maintain prime. EBW® angle check valves are installed at the top of an underground storage tank suction line. Single poppet models are typically used where access to the valve is readily available.
Under pump/in-line check valves are designed to be installed directly in the inlet of the dispenser pumping unit to maintain prime on a suction system fuel line. The under pump/in-line check valve can also be used in a pressurized system at the submersible pump outlet to hold product in the line. Cast-in Hex for sturdy wrenching surface. NPT threads on both ends are designed to receive female threaded product lines. Pressure relief models relieve thermal expansion in the pumping unit, reducing the chance of vapor lock.
Used to install, service, and test Defender Series® spill containers.