Fast, safe vapor recovery is easy with probed hose couplers. Hose shank end bands to a vapour recovery hose and the probe automatically opens the poppet of the vapor check valve when coupled. The coupler comes in three sizes for use with most vapor check valves and hose configurations. The poppetted vapor return hose coupler design prevents vapor from escaping when disconnected. The probe automatically opens the vapor check valve when connected properly. The design also offers low restrictive vapor passage. The body and probe are made of heat-treated anodised aluminium with forged bronze cams and stainless steel pins, and the poppet has a replaceable fluorocarbon seal.
The magnetic starter incorporates ambient compensated relays with quick trip heaters and three leg protection to assure proper 3 HP and 5 Hp pump motor protection.
Drop tubes ensure fuel is efficiently delivered at a faster rate and allow for submerged filling, generating less vapors and evaporation.
The Side Seal Adapter is designed to give flexibility to top seal drop elbows. Your 4" top seal delivery elbow can now be used on a side 4" seal fill adapter. You don’t have to bring a separate side seal elbow, which reduces cost and the number of fittings required on your truck. Two lever clamps secure the adapter to the station’s side seal fitting and allow a 4" elbow to attach to the adapter. Special locking rings prevent accidental cam arm release during filling. Cast aluminum makes the side seal adapter light and strong. The specially designed seal gives you the added insurance that no leaks will occur.
PetroSeal entry boots are two-piece boots for 50mm to 160mm UPP pipework. Using band clips and a backing ring to ensure a perfect fit and the highest quality entry boot.
FLEX-ING™ brand probe access manholes offer an ideal solution for housing fuel management systems electronics and providing tank access with isolation from backfill.
FLEX-ING™ brand diesel exhaust fluid ¾" break aways provide in-line protection for hanging hardware in the event of a drive off. These break aways feature a stainless steel design and internal components that make them completely compatible with DEF/AdBlue®. Upon separation the check valve in each half of the break away seals instantly, preventing fuel from escaping at both ends.
Emergency Valves make product handling safer. These Emergency Valves have a shear groove that meets 49 CFR 178.345-8. The seat area of the valve is located inside the tank shell as required by DOT regulations. This valve gives you the advantage of a faster flow rate while fitting a standard 4" TTMA sump. The high flow rate is established by a full opening throat area. Emergency Valves are available in 90° elbow type or straight type, 4" TTMA flanges or Victaulic™ outlet, and mechanical or air assisted.