EBW™ brand monitoring well cap plugs expand on the inside diameter of the screen pipe casing to form a vapor and watertight seal. An integrated locking mechanism prevents unauthorized access. The locking mechanism features a captured bolt, eliminating potential drop-out. The cap is a distinctive yellow color and features the words "Do Not Fill - Monitor Well" which is molded into the cap.
Angle check valves are used on suction system fuel lines to maintain prime. EBW angle check valves are installed at the top of an underground storage tank suction line. Single poppet models are typically used where access to the valve is readily available.
FLEX-ING™ brand hose retrievers are used to keep excess hose raised off the ground at sites which typically use long hoses such as truck refueling sites. The hose retriever prevents safety hazards, kinks, tangles and prolongs the life of the hose. Combine the hose retriever with the hose retriever base plate and hose support for a complete hose retriever system.
APT™ brand 4” XP Pipe ducting allows for simple and easy pipe removal without the need for extensive excavation. The 4” inside diameter of the ducting allows XP pipe to easily slide through during installation or removal. This updated design features integrated flat, non-corrugated sections which provide flat sealing surfaces for tight entry boot connections.
Brass Foot Valve: Foot valves are used to maintain the prime in suction system fuel lines. The foot valves are installed at the bottom of the suction pipe at the bottom of an underground storage tank. Single poppet foot valves are typically used where easy access to the valve is available. Double poppet models offer twice as much protection for maintaining the prime. Both 1-1/2" models can be used with EBW 320 extractor fittings. Foot Valve Extractor: The 320 foot valve extractor is designed for use with the 150 and 156 1-1/2" foot valves. This 20 lb. extractor valve provides a means to remove foot valves easily from underground storage tanks for cleaning or servicing. The 320 foot valve extractor is gasket sealed to prevent loss of prime caused by air being sucked in through the top fitting.
FLEX-ING™ brand utility break aways are designed to provide protection for dispensing equipment at high capacity fueling locations. These heavy-duty break aways are ideal for applications including marinas, truck and bus terminals, off road refueling, fuel oil delivery and other industrial applications.
Installation kit for installing sensors in a dry tank interstitial or monitoring well with a 4" (10 cm) riser. The interstitial/monitoring well cap is compression-fit into the riser pipe via the use of a lever.
EBW™ brand monitoring well screen pipes facilitate groundwater testing by allowing groundwater to pass through horizontal slots in the pipe. The screen pipe features precision cut slot apertures that provide a measured and uniform barrier to ingress with no sharp edges to damage the filter sock or oversized apertures that can allow bulging and perforation of the filter sock.
Use this Vapor Check Valve to return vapor to the truck during terminal loading and service station drops. The 3" poppet opens when coupled and closes when disconnected, preventing the vapors from escaping into the atmosphere. The valve has 3" or 4" female NPSM threads, a 4" cam and groove, and tapped mounting holes for the EBW Air Interlock Brake. The 303 series is available without a poppet to serve as a male quick coupler with an Air Interlock Valve mounting pad.