Under pump/in-line check valves are designed to be installed directly in the inlet of the dispenser pumping unit to maintain prime on a suction system fuel line. The under pump/in-line check valve can also be used in a pressurized system at the submersible pump outlet to hold product in the line. Cast-in Hex for sturdy wrenching surface. NPT threads on both ends are designed to receive female threaded product lines. Pressure relief models relieve thermal expansion in the pumping unit, reducing the chance of vapor lock.
HEALY™ Low Permeation Conventional Hose Assembly is designed for use in refueling applications requiring reduced permeation rates of 10 g/m^2/day to improve air quality and emissions. This premium hose provides long-lasting service with multi-fuel compatibility.
The EBW® vapor shear valve is designed for use as an emergency breakaway on Stage II vapor recovery lines in fuel dispensers. The double poppet design allows spring-loaded poppets inside the valve to seal vapors within both the dispenser riser and vapor piping in the event of dispenser displacement, providing maximum environmental protection.
Anti-kink hose clamps help to prevent costly hose replacements and fines that damaged hoses can lead to. The clamp provides a five-point bolt-down system to fully secure the hose into place and prevent it from sliding out of position and coming into contact with the ground. Anti-kink hose clamps keep hoses up off the pavement and islands, and away from vehicle tires. Hose run-overs can inflict permanent damage leading to obstructed fuel and vapor flow paths and unnecessary forecourt hazards.
FLEX-ING™ fiberglass manways provide maximum access to tank sumps while delivering solid durability. They feature a full fiberglass construction with a composite lightweight lid for easy access. The unique contoured skirt design expands out to 47”, providing clear access to large tank sumps as well as giving the manway added strength.
Fuel Identification Markers and Fill Identifier.
Let gravity do all the work with these high strength, corrosion-resistant adapters. A 22.5 degree angle makes service station drops a breeze with easy hose coupling and fast, unrestricted off-loading. Engineered to mate with API RP 1004 Bottom Loading Adapters, each adapter comes with a heavy-duty attachment chain and uses a large, resilient gasket that guarantees minimum product loss. The lightweight adapters are available in 3" male NPT or male cam and groove; 4" male NPT, male cam and groove or female cam and groove.
The EBW Warden® is designed to provide a positive shut-off during a pressurized fill delivery on an aboveground storage tank. It eliminates spills and overfills, avoiding costly cleanup expenses and ground contamination. The Warden® is fully adjustable to provide shut-off in various height and capacity aboveground tanks. It is designed to fit into a 4" fill riser, making installation on new and existing locations simple and quick. Designed with inverted floats for use in small or large rectangular tanks. Requires 4" minimum ullage. Note: The Warden® is recommended for use with clean product only. Contaminated product may cause erratic operation or valve failure
Handle fuel vapors safely and efficiently with this lightweight aluminum vapor valve. The air-operated valve allows fast vapor flow during loading and unloading. The poppet is designed to open into the tank, preventing accidental leakage from product surges or from a tank truck rollover. Easy-to-use air line connections are located outside the compartment for convenient installation and maintenance. The 3.5" vapor valve comes with male NPT threads or a TTMA flange for installation in conventional 16" or 20" manholes.
The TS-RA2 is a high intensity remote audible and visible alarm unit for use with Franklin Fueling Systems Automatic Tank Gauges. The unit may be used as an overfill alarm as required by federal, state and local regulations, or as a general purpose remote alarm annunciator.