These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 305 allow for EIF welding. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
The S940 Sensor Alarm Console is a cost effective solution for tank overfill protection and sensor leak detection needs.
The Multiplexing Sensor Hub™ (MSH) allows station owners to add additional sensors to existing sites without having to break concrete to run new conduit and wires.
The Defender Series®™ Multiport Manways include the Defender Series® Spill Containers and feature the patented watertight sealing system. Available in both 36" and 42" models with a variety of configurations to meet the needs of any application.
APT’s TS-2430, TS-3630 and TS-4230 tank sumps are ideally suited for low cost retro fits and shallow burial applications. The TS-2430 is ideal for line branching points and for containing piping splices. The 36" or 42" bases provide ample space for submersibles and fittings. The bolt-on gasket-lid combination fits economically under a 30" manway.
Loading and off-loading fuel from a transport truck is easier than ever with the bottom loading adapters from Franklin Electric Fueling Systems. While loading, the free floating poppet opens under pressure allowing the handle to remain in the closed position. This minimizes spillage caused by leaving the handle in the open position when disconnected from the bottom loader. The adapter handle is offered in aluminum or nylon and provides two open positions of flow allowing the delivery driver to manage the flow rate while off-loading fuel from the truck. The lightweight, heavy-duty adapter is engineered and tested to meet API RP 1004 specifications. The outer end is made of hard coated aluminum and rotates seven times to maximize the products life and prevent wear that can be caused by terminal off-loading couplings. The inner wall of the adapter is fully tapered, minimizing product retention inside of the valve when off loading is complete. Each model is compatible with all API dry disconnect couplers and are constructed with a standard TTMA 4" tank truck flange and mounting lugs for air interlock valves. Sight glass options are mounted on the side of the valve to maximize visibility during fuel transfer and are available in 1" and 3.5" sizes. Fuel loading and off loading management has never been easier, safer or more efficient.
The FLEX-ING™ brand DuraDEF™ nozzle features a specially encapsulated aluminum casting which is lightweight yet completely DEF/AdBlue® compatible. It provides the performance and construction specifications required for DEF/AdBlue® delivery in a familiar, user-friendly design. This nozzle features a mis-fill prevention spout that prevents DEF from being dispensed unless the spout is engaged with a miss-fill prevention device (MPD). The MPD is available separately.
Ensure proper vapor recovery every time by using the Air Interlock with Limit Switch. With the limit switch, bottom loading cannot begin until a vapor recovery hose is connected to the vapor check valve. The switch does its job by breaking a connection in the secondary over-fill prevention system, thus preventing the rack monitor from giving a green light to the transport. Once a vapor line is connected, loading can begin. The coupler first depresses the plunger button of the interlock, which then locks the trailer brake system and completes the connection to the rack monitor. The vapor hose must be disconnected before the brakes will release, allowing the truck to be driven away.
APT® Large Mouth Polyethylene Dispenser Sumps feature a two-piece modular design and large sump opening to provide easy installation and ample space for under dispenser containment. With a variety of sump lengths, two depth options, an assortment of top frame options, and field height adjustability, there is a solution to match virtually any application and provide complete compatibility with the industry's most popular dispenser models.
Download the latest firmware version upgrades for Integrated Electrical Control products.