With the PetroTite Standard and Optimum fusion chambers the riser section electrofuses to the base, removing the need for multiple bolt holes and foam gaskets in this area, therefore dramatically reducing the number of potential leak paths. With its simplified assembly, this electrofusion system also reduces the installation time. Welding of the chamber can be performed using UPP electrofusion equipment in approximately six minutes. Once welded and cooled the base and riser of the OCH models become one homogeneous unit, with no mechanical joints and no leak points. The chamber can then be vacuum tested to ensure that it is 100% leak-tight. The Optimum chamber is available with either Deep or Shallow bases, and both will allow for a very easy installation of pipework before the riser is fused into place.
All-In-One Dispenser Disconnects offer a flexible approach to disconnecting low voltage circuits including, data, credit cards, intercom/communication, and video/media circuit conductors connected to dispensers. Primary and secondary disconnects for both twisted pair and Ethernet circuits are combined into one space-saving, pre-configured enclosure.
Communication/Intercom Secondary Disconnects are designed to expand the number and type of circuits that can be disconnected. They are used for intercom wiring and can also be used to disconnect additional communication conductors connected to a dispenser.
Our objective is to utilize standard fittings whenever possible. Consequently, all APT swivel and non-swivel fittings are compatible with standard 1½", 2" and 2½" NPT plumbing fittings that can be purchased in your area.
Angle check valves are used on suction system fuel lines to maintain prime. EBW angle check valves are installed at the top of an underground storage tank suction line. Single poppet models are typically used where access to the valve is readily available.
APT™ brand Fusion Ducted Entry Boots provide a watertight seal between XP Pipe and polyethylene constructed containment sumps. Utilizing the electrofusion welding process, the entry boot, ducting, and sump become one solid structure, creating a watertight entry into the containment space.
Available in either 42" or 48" diameters, fiberglass tank sump collars allow for watertight installation of tank sumps to the top of the tank.
The Surge Management System provides surge protection for dispensers as well as multiple types of common electronic circuits in one, consolidated enclosure.
The APT™ brand 36" x 17" conduitless entry fiberglass sump is designed specifically for use with Gilbarco™ Encore™ dispensers. The dispenser sump comes completely pre-assembled from the factory including the dispenser mounting frame and the stabilizer bar kit mounting tracks. The stabilizer bar kit mounts into the track and is adjustable on all planes to ensure proper alignment of shear valves and pipework. The conduitless entry frame allows electrical conduit to enter the dispenser directly from the bottom avoiding sump penetration and eliminating potential leak paths.
The NexPhase™ Smart EV Switchgear is a turnkey EV charging infrastructure solution. NexPhase™ integrates all necessary components required between the utility service and Level 3 DC fast chargers into an all-in-one panel solution.Unlike any switchgear of its kind, the NexPhase™ Smart EV Switchgear features cutting-edge grid intelligence for switchgear and EV charger remote monitoring and control. MultiColumn Video