EBW™ Anti Syphon Valves are recommended for all aboveground storage applications to prevent fuel from exiting the storage tank in the event of a broken line or leak. The Anti Syphon Valve will shut-off product flow when lines are broken, preventing fuel spillage and fire hazards.
This longer Coaxial Delivery Elbow is designed to accommodate the needs of the tank truck industry. The longer elbow is made of durable lightweight cast aluminum. The elbow connects to the product line and vapor recovery line at the same time, allowing for single point drop and vapor recovery. This elbow meets Stage I and II vapor recovery standards.
EBW® Steel Knock Down Manways feature a 3/8" diamond back steel plate cover with a galvanized steel skirt. Covers available in 16" × 16" and 24" × 24" dimensions, engineered and tested to meet or exceed H20 and HS20 load ratings, and each is individually boxed with skirt in knock down form for easy handling and storing.
SAFE-LITE FRC access covers are ultra lightweight. Engineered and tested to meet or exceed H20 and HS20 load ratings. Covers weigh almost one-third less than steel, which dramatically reduces injury potential during cover removal. Available in 12", 30", 36", and 42" sizes.
APT™ brand split test boots are designed to make the integrity testing of secondary contained XP Flexible Piping simple and easy. For use on both new or existing sites, these boots feature a hinged design that allows you to clamp the boot down over the pipe after it has been installed. The boot locks itself in position between the primary and secondary pipe layers using the stainless steel clamp.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 305 allow for EIF welding. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
Available as a factory installed option on STPAG and IST biofuel compatible submersible turbine pumps (STPs), Corrosion Control™ Advanced Protection defends STPs from accelerated corrosion.
By connecting to the site’s emergency stop system, Ethernet Primary Dispenser Disconnects provide low voltage disconnection for dispensers that use Ethernet network cabling for primary dispenser communication. Models are available that will disconnect 1 or 2 Ethernet cables for 8 dispensers or disconnect one Ethernet cable for 16 dispensers.