FLEX-ING™ brand diesel exhaust fluid ¾" break aways provide in-line protection for hanging hardware in the event of a drive off. These break aways feature a stainless steel design and internal components that make them completely compatible with DEF/AdBlue®. Upon separation the check valve in each half of the break away seals instantly, preventing fuel from escaping at both ends.
The HEALY™ 800 Series Onboard Refueling Vapor Recovery (ORVR) nozzle converts any new or existing dispenser to a CARB certified system for ORVR compatibility. The smart interface design will automatically detect whether a vehicle is equipped with ORVR to prevent over-pressurization caused by clean air being pulled back into the storage tank. Available for use outside of the United States.
The hosebun hose support features a polyurethane saddle designed to suspend hoses while accommodating the manufacturer's minimum bend radius and protects the hose from kinking which prolongs the life of the hose.
The HEALY™ clean air separator prevents excess emissions and product loss by controlling gasoline storage tank pressure. The unit works in combination with Healy ORVR/EVR type nozzles as part of a system that increases overall performance and efficiency.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 305 allow for EIF welding. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
The EBW 410 fuel oil delivery nozzle has hold-open notches and a lever pin bushing made of Nylafil, which resists wear five times longer than metal and is unaffected by temperature extremes. This is the most rugged nozzle available with a heavy duty body and increased wear lugs. Dashpot construction ensures smooth opening, shockproof closure and maximum flow.
SAFE-LITE FRC access covers are ultra lightweight. Engineered and tested to meet or exceed H20 and HS20 load ratings. Covers weigh almost one-third less than steel, which dramatically reduces injury potential during cover removal. Available in 12", 30", 36", and 42" sizes.
The DTS is a discriminating turbine sump sensor that detects the presence of liquid and hydrocarbons when installed in tank containment sumps.
Vented installation kit for use with the FMP-HIS-U or FMP-HIS XL-U sensor installed in a 4" (10 cm) reservoir opening on double wall fiberglass tanks. The cap is compression-fit into the riser pipe via the use of a lever.