EBW union check valves are designed to be installed into an existing union to temporarily stop the loss of prime due to damaged foot valves, angle check valves, or vertical check valves in a suction system fuel line. Spring-loaded poppet. Open construction design allows for free flow of product. With or without protective screen.
Ball float vent valves are used in conjunction with extractor vent valves in the Stage I vapor riser or tank vent lines on underground storage tanks. The ball float vent valve will restrict vapor venting should a full tank condition occur and protects against product mixing and vapor locks due to vent pipe flooding. WARNING: 308 Series float vents should not be used with suction pump systems. For use on gravity drop systems only. Do not use with pump-off unloading. Do not use with coaxial Stage I vapor recovery drop tubes.
The FLEX-ING™ brand DuraDEF™ nozzle features a specially encapsulated aluminum casting that makes it lightweight yet completely compatible with DEF (Diesel Exhaust Fluid)/AdBlue®. This nozzle provides the performance and construction specifications required for DEF/AdBlue® delivery with a lightweight, more user-friendly design.
EBW tank vents are designed to provide an open path for vapors from an underground or aboveground storage tank to the atmosphere.
EBW tank vents are designed to provide an open path for vapors from an underground or aboveground storage tank to the atmosphere.
HEALY™ brand ¾" low permeation coaxial vapor recovery hose is designed for use in refueling applications requiring reduced permeation rates of 10 g/m^2/day to improve air quality and emissions. This premium hose provides long-lasting service with multi-fuel compatibility.
EBW® Steel Knock Down Manways feature a 3/8" diamond back steel plate cover with a galvanized steel skirt. Covers available in 16" × 16" and 24" × 24" dimensions, engineered and tested to meet or exceed H20 and HS20 load ratings, and each is individually boxed with skirt in knock down form for easy handling and storing.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe.