EBW tank vents are designed to provide an open path for vapors from an underground or aboveground storage tank to the atmosphere.
EBW tank vents are designed to provide an open path for vapors from an underground or aboveground storage tank to the atmosphere.
The EBW™ brand 498 Series manual nozzle has a cast aluminum body, and stainless steel stem for trouble-free service and easy operation. In addition, this nozzle’s high flow, minimum pressure loss and excellent throttling characteristics provide fast and accurate deliveries with top-off control.
Designed to provide maximum protection from water intrusion with a simplified installation process, the Watertight Fiberglass Tank Sump delivers easy access to tank top equipment for fast maintenance and servicing. Completing the installation is simple. The pour-in-place slurry secures the riser to the base’s integrated channel, with no messy fiberglassing required. Available without bottom or with enclosed bottom.
FLEX-ING™ brand 1½" diesel exhaust fluid shear valves shut off the flow of DEF/AdBlue® in the event of a vehicle collision with a dispenser preventing an excessive and uncontrolled release into the environment. The optional e-coated mounting bracket allows installation both in containment sumps beneath the dispenser as well as direct mounting to the concrete forecourt.
Angle check valves are used on suction system fuel lines to maintain prime. EBW® angle check valves are installed at the top of an underground storage tank suction line. Single poppet models are typically used where access to the valve is readily available.
This durable 22" tall product elbow was designed for those deep tank burial applications and has a high flow rate as a result of the unrestricted flow pattern. It fits all 4-inch top seal adapters and can also be ordered with a variety of different adapters to meet any requirement. The single four bolt flange design allows for easy replacement of adapters over competitive threaded styles and is designed for extremely easy on- and off-coupling as a result of aluminum bronze alloy docking.
The APT® below grade intermediate piping sump is a multifunctional component in the underground flexible piping system. The IPS-2424 and IPS-3636 can be used as a containment sump for fittings when utilizing a tee between dispenser islands, for contained piping splices, or for line branching points. These sumps are ideal for a low point sensor chamber between USTs and dispenser islands where required.
The high capacity mechanical leak detector is capable of detecting leaks of 3 gph (11.4 lph) or greater at 10 psi (69 kpa). Its compact design allows installation in the same containment sump as the submersible pump, greatly reducing the amount of unprotected leak points between the submersible and the mechanical leak detector.