The advantages you gain from upgrading from fixed speed to variable speed are undeniable. With variable speed conversion kits you can achieve higher, consistent flow rates, in turn boosting your profits, while eliminating the wear and tear hydraulic hammer can cause.
The TS-RA2 is a high intensity remote audible and visible alarm unit for use with Franklin Fueling Systems Automatic Tank Gauges. The unit may be used as an overfill alarm as required by federal, state and local regulations, or as a general purpose remote alarm annunciator.
APT bulkhead boots boast an enlarged gasket area to seal against the sump wall and incorporate the proven advantages of the APT standard flexible entry boot seal. The bulkhead boot requires only a single hole to be drilled for installation, reducing labor time and cost. APT offers a complete line of sizes for ½" through 2½" single and secondary contained pipe. The 1½" through 2½" sizes are also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.
Ensure proper vapor recovery every time by using the Air Interlock with Limit Switch. With the limit switch, bottom loading cannot begin until a vapor recovery hose is connected to the vapor check valve. The switch does its job by breaking a connection in the secondary over-fill prevention system, thus preventing the rack monitor from giving a green light to the transport. Once a vapor line is connected, loading can begin. The coupler first depresses the plunger button of the interlock, which then locks the trailer brake system and completes the connection to the rack monitor. The vapor hose must be disconnected before the brakes will release, allowing the truck to be driven away.
Probe installation kits are used to install inventory and leak detection probes in underground storage tank applications using either 2" or 4" riser pipes.
APT™ brand Fusion Ducted Entry Boots provide a watertight seal between XP Pipe and polyethylene constructed containment sumps. Utilizing the electrofusion welding process, the entry boot, ducting, and sump become one solid structure, creating a watertight entry into the containment space.
The EBW® vapor shear valve is designed for use as an emergency breakaway on Stage II vapor recovery lines in fuel dispensers. The double poppet design allows spring-loaded poppets inside the valve to seal vapors within both the dispenser riser and vapor piping in the event of dispenser displacement, providing maximum environmental protection.
EBW® extractor vent valves are designed to fit into a 4" tank opening on an underground storage tank. Several outlet sizes are available to accommodate manifolded tank lines and Stage II vapor recovery installations. E-coated bodies are fully compatible for alcohol/gas blends and biodiesel.
