The DC400 Dispensing Cutoff System is a stand-alone, solid state two-part system which includes a controller and sensor, designed to automatically shut down product flow if liquid is detected inside containment spaces. Ideal for retrofit applications, the DC400 allows for easy compliance with new and evolving regulations, without the added expenses of shutting down your site to break concrete for new conduit and wiring installation. The DC400 can be mounted inside any turbine sump to provide complete pump shut down or mounted directly into dispenser sumps, allowing only the effected dispenser to be shut down as liquid is detected.
The 9000 Mini-Jet is a non-electric central vacuum pump that uses the product flow of a submersible turbine pump to create a vacuum for vapor recovery. One Mini-Jet can handle eight fueling positions with four nozzles in simultaneous full flow operation. Additional Mini-Jet can be added for larger sites. Provides high reliability and low maintenance. High vacuum level assures clearing of flooded vapor hoses.
The HIS detects leaks in double wall tanks where the interstitial space is filled with a liquid brine solution. The polyester, Nitrile, and epoxy construction is compatible with all types of brine.
Whether you are working in a tight, low-overhead space or a high aboveground storage tank, our flexible probes are designed to accommodate your tanks.
The TS-RK is a remote alarm acknowledge unit for use with all Franklin Fueling Systems Automatic Tank Gauges equipped with remote alarm annunciators.
Loading and off-loading fuel from a transport truck is easier than ever with the bottom loading adapters from Franklin Electric Fueling Systems. While loading, the free floating poppet opens under pressure allowing the handle to remain in the closed position. This minimizes spillage caused by leaving the handle in the open position when disconnected from the bottom loader. The adapter handle is offered in aluminum or nylon and provides two open positions of flow allowing the delivery driver to manage the flow rate while off-loading fuel from the truck. The lightweight, heavy-duty adapter is engineered and tested to meet API RP 1004 specifications. The outer end is made of hard coated aluminum and rotates seven times to maximize the products life and prevent wear that can be caused by terminal off-loading couplings. The inner wall of the adapter is fully tapered, minimizing product retention inside of the valve when off loading is complete. Each model is compatible with all API dry disconnect couplers and are constructed with a standard TTMA 4" tank truck flange and mounting lugs for air interlock valves. Sight glass options are mounted on the side of the valve to maximize visibility during fuel transfer and are available in 1" and 3.5" sizes. Fuel loading and off loading management has never been easier, safer or more efficient.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 305 allow for EIF welding. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
Fiberglass seam kits include everything you need to complete a fiberglass containment sump installation. These kits are for use with all APT® brand fiberglass turbine sumps as well as EBW® brand fiberglass multiport sumps.
With a thick and robust wall, the new duct is equally flexible and can be welded to electrofusion entry seals and other 110mm electrofusion fittings. The duct will provide a water tight chase for pipes or electrical cables when fully welded. This product is for use as an electrical duct or gravel guard for fuel pipework.
Low profile, single wall fiberglass dispenser sumps provide easy access to under-dispenser equipment and piping connections. The tapered sump top facilitates optimal installation with non-island dispenser applications while also accommodating island forms. Designed with the electrician in mind, the flat ends of the sump allow electrical conduit to be installed with minimized bending while an integrated conduit mounting channel expedites conduit installation.