The sight glasses featured on this vapor recovery fitting can help detect liquid accumulation in the vapor manifold of a transport. A drain plug lets any extra fuel drain out, and the poppet prevents vapors from escaping when disconnected from the hose. A low pressure drop makes flow rates faster and vapor recovery safer. The adapter is constructed with a standard 4" TTMA flange, a 4" cam and groove, and a mounting pad for the Air Interlock Valve.
Installation kit for installing sensors in a dry tank interstitial or monitoring well with a 4" (10 cm) riser. The interstitial/monitoring well cap is compression-fit into the riser pipe via the use of a lever.
Available in 7½", 12", and 18" diameters, round cast iron manways feature a durable cast iron cover and skirt built to withstand heavy traffic loads.
The EBW AST spill container gives overflow protection to fill and vapor return risers on an aboveground storage tank. Its 7-1/2 gallon capacity prevents potential environmental problems by containing fuel overfill spills during fill-up.
The wall transition sleeve is a practical, environmentally sound solution for below ground generator or boiler applications that pass through the walls of buildings or concrete structures. Piping enters the sleeve through APT’s special flexible entry boots. The wall transition sleeve is an economical alternative that allows a straightforward installation with no tools.
The HEALY™ clean air separator prevents excess emissions and product loss by controlling gasoline storage tank pressure. The unit works in combination with Healy ORVR/EVR type nozzles as part of a system that increases overall performance and efficiency.
EBW™ brand single-plane utility swivels are designed to provide an in-line swivel action between the nozzle and hose, providing ease of delivery in utility refueling applications.
Emergency Valves make product handling safer. These Emergency Valves have a shear groove that meets 49 CFR 178.345-8. The seat area of the valve is located inside the tank shell as required by DOT regulations. This valve gives you the advantage of a faster flow rate while fitting a standard 4" TTMA sump. The high flow rate is established by a full opening throat area. Emergency Valves are available in 90° elbow type or straight type, 4" TTMA flanges or Victaulic™ outlet, and mechanical or air assisted.
Phase separation float kits deliver fuel inventory monitoring, water level detection, and phase separation detection all in one kit.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 308 allow a second boot to be fitted to the outside as a gravel guard. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.