Dispenser Surge Suppression Kits provides surge protection for single dispenser AC power and data circuits.
In-station diagnostics (ISD) ensures that all components of the vapor recovery system are functioning normally.
With the PetroTite Standard and Optimum fusion chambers the riser section electrofuses to the base, removing the need for multiple bolt holes and foam gaskets in this area, therefore dramatically reducing the number of potential leak paths. With its simplified assembly, this electrofusion system also reduces the installation time. Welding of the chamber can be performed using UPP electrofusion equipment in approximately six minutes. Once welded and cooled the base and riser of the OCH models become one homogeneous unit, with no mechanical joints and no leak points. The chamber can then be vacuum tested to ensure that it is 100% leak-tight. The Optimum chamber is available with either Deep or Shallow bases, and both will allow for a very easy installation of pipework before the riser is fused into place.
EBW® 8", 10", and 14" monitoring wells are equipped with strong cast iron, bolt-down lids to provide limited access to entering the manway. A watertight seal prevents contamination and a heavy-duty cast iron rim protects the manway from forecourt traffic. The lid features a distinctive triangle and the words "Do Not Fill - Test Well" which are both cast into the cover to meet API specifications.
The Power Integrity™ Remote Control Solution (RCS) fueling control panel combines the required dispenser/pump disconnects, dispenser hook isolation, low-voltage dispenser data disconnects, and E-stops into a single panel. The RCS also provides advanced device power status monitoring, remote E-Stop engagement, and remote power resetting capabilities for fuel system and C-store critical assets. With OVERSITE™ remote monitoring and power cycling capabilities, C-Store operators can remotely reset fuel dispensers, site controllers, submersible pumps, and more, significantly reducing the need for costly on-site maintenance trips and eliminating the expenses associated with extended downtime.
The EVO™ EDGE Car Wash Monitoring System delivers real-time car wash chemical inventory management. The system is compatible with all common car wash chemicals including soaps, waxes, pre-soaks, and degreasers. The non-intrusive installation allows for easy retrofitting on any type of car wash chemical container with zero obstruction during a refill.
The Defender Series® remote fill splice kit allows you to modify a standard drop tube for remote fill applications.
The economical EBW™ brand 402 Series utility nozzle is constructed of high tensile strength aluminum alloy. Its angled design allows more efficient fueling positions by reducing hose wear and pinch points.
Our objective is to utilize standard fittings whenever possible. Consequently, all APT swivel and non-swivel fittings are compatible with standard 1½", 2" and 2½" NPT plumbing fittings that can be purchased in your area.
EBW extractor vent valves are designed to fit into a 4" tank opening on an underground storage tank. Several outlet sizes are available to accommodate manifolded tank lines and Stage II vapor recovery installations. E-coated bodies are fully compatible for alcohol/gas blends and biodiesel.