For retail fueling and convenience store applications, Configured Panel Solutions provide a complete petroleum control and power distribution solution for an entire location.
The HLS level sensor is an overfill prevention switch that may be adjusted to operate over a wide range of levels. The HLS is based on float-switch technology and is made of chemical-resistant materials to assure compatibility with most liquids.
APT™ brand split test boots are designed to make the integrity testing of secondary contained XP Flexible Piping simple and easy. For use on both new or existing sites, these boots feature a hinged design that allows you to clamp the boot down over the pipe after it has been installed. The boot locks itself in position between the primary and secondary pipe layers using the stainless steel clamp.
APT® double wall rigid entry boots allow you to create connections between APT® XP double wall flexible pipe and double wall fiberglass containment sumps. These boots are easily installed to the sump wall using the included adhesive with no additional messy fiberglass work required. Rigid entry boots require only a single 3¾” entry hole for installation, eliminating the time-consuming process of drilling multiple holes as well as the templates they require.
The EBW® vapor shear valve is designed for use as an emergency breakaway on Stage II vapor recovery lines in fuel dispensers. The double poppet design allows spring-loaded poppets inside the valve to seal vapors within both the dispenser riser and vapor piping in the event of dispenser displacement, providing maximum environmental protection.
Proactively monitor for and remove the main corrosion-causing elements including water and moisture from diesel tanks and containment sumps with the Corrosion Control™ System.
APT tank fitting adapters provide a high quality, cost-effective way to mount tank sumps to a standard 4" NPT tank opening or 6" NPT tank opening. The bright zinc plated cast iron construction is not only strong, but corrosion-resistant. The TFA-400-II and TFA-600 are easy to install and their single hole style mounting allows sumps to be rotated to properly align pipe entries.
As part of the CableTight™ Wire Management System, the Rigid Conduit System is ideal for applications where local regulations specify the use of ¾" bore rigid conduit but still require a liquid-tight containment entry.
The EBW® brand sealing dip cap prevents the overflowing of a tank through uncapped tank dipstick risers. The 3" sealing dip cap incorporates a spring-loaded, self-closing internal valve which seals when the sealing cap is removed and the dipstick is not in place. This innovative safety feature provides overflow protection whether the sealing cap and the dipstick are removed, or the sealing cap is in position with an attached dipstick stored in the tank.
HEALY™ vapor recovery break away valves provide full product and vapor shut-off in the event of a drive-off with 350 lbs of separation force. Reduce damage to the dispenser, vehicle, and forecourt with the immediate sealing of both fuel and vapor pathways. Both in-line and swivel break away valve options are certified to be reconnected in the field to help mitigate the cost of separations.