These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 308 allow a second boot to be fitted to the outside as a gravel guard. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
Ethernet Secondary Disconnects are secondary dispenser wiring disconnects designed to expand the number and type of cabling that can be disconnected. They are designed for dispensers that use Ethernet network cabling for secondary dispenser communication.
APT™ brand Fusion Ducted Entry Boots provide a watertight seal between XP Pipe and polyethylene constructed containment sumps. Utilizing the electrofusion welding process, the entry boot, ducting, and sump become one solid structure, creating a watertight entry into the containment space.
With faster fill times during peak hours and power savings during non-peak hours, FE PETRO® 4 Hp variable speed submersible pumps deliver maximized profits while mitigating operating expenses.
EVO™ 600 & EVO™ 6000 provide highly accurate inventory management and full-featured compliance monitoring for any size fuel system. The EVO™ Series offers a robust platform that transcends conventional fuel management by automating fuel system operations, enhancing C-store performance, and providing remote access to critical data so operators can run their business as efficiently as possible.
By connecting to the site’s emergency stop system, Twisted Pair Primary Dispenser Disconnects are designed to disconnect low voltage communication conductors. These conductors include dispenser data and credit card data two-wire, twisted pair circuits for a total of 4 conductors for up to 8, 12, or 16 dispensers.
The Low Level Water Float for Diesel provides increased water level detection down to ¼", delivering early indication of the presence of water inside diesel tanks.
UPP® brand electrofusion fiberglass entry boots allow you to seamlessly connect UPP® brand double wall semi-rigid pipework systems to fiberglass containment sumps.
APT tank fitting adapters provide a high quality, cost-effective way to mount tank sumps to a standard 4" NPT tank opening or 6" NPT tank opening. The bright zinc plated cast iron construction is not only strong, but corrosion-resistant. The TFA-400-II and TFA-600 are easy to install and their single hole style mounting allows sumps to be rotated to properly align pipe entries.
Available in either 42" or 48" diameters, fiberglass tank sump collars allow for watertight installation of tank sumps to the top of the tank.