Menu Show/Hide Menu
Menu Show/Hide Menu
Secondary Disconnect

Ethernet Disconnects

Ethernet Secondary Disconnects - Hero.psd
Secondary Disconnect

Ethernet Disconnects

Ethernet Secondary Disconnects are secondary dispenser wiring disconnects designed to expand the number and type of cabling that can be disconnected. They are designed for dispensers that use Ethernet network cabling for secondary dispenser communication.

Secondary Ethernet Side - Highlight.psd

SECONDARY DISCONNECTS

Secondary Ethernet Disconnects expand the capability of the Primary Disconnect. They connect to and are controlled by any Primary Disconnect via the included 6’ and 25’ DB-9 cables. Wall or Rack Mount options available.

Emergency Stop

Secondary Disconnects connect to the Primary Disconnect allowing secondary circuit conductors to be disconnected when the emergency stop system is activated.

Ethernet Disconnect

Handles disconnect for 1 or 2 Ethernet cables for 8 dispensers or disconnect for 1 Ethernet cable for 16 dispensers.

Easy Installation

Individual disconnects for each circuit types allows the disconnect to be located where the conductors enter the building. This can eliminate costly additional wiring and downtime that maybe required to re-route conductors to a central location such as the electrical room, during a retrofit or site upgrade.

Certifications/Approvals

  • UL (1238) Listed
  • cUL (CSA 22.2) Listed
  • For compliance with NEC® 514.11 and NFPA® 30A Section 6.7 requirements for Emergency Disconnects at Motor Fuel Dispensing Facilities (controlled by E-Stop system).
  • For compliance with NEC® 514.13 requirements for Maintenance Disconnects at Motor Fuel Dispensing Facilities (switches to disconnect individual dispenser circuits for servicing).

General

Number of Dispenser Channels 8 or 16
E-Stop Control Input Connects to Remote Control
Output of Primary Disconnect
Number of Conductors Disconnected
per Dispenser		 8D and 16D Models = 1 Ethernet
Cable per Dispenser

88D = 2 Ethernet Cables per
Dispenser
Signal Circuit Rating Class 2, 48V Max, 3 Amp
Surge Protection Available No
Individual Channel Control Switches Provided by the Primary
Disconnect
Secondary Remote Expansion
Output		 Yes
Dimensions 19” H x 9” W x 3.4”D

Components & Dimensions

  1. Input Connection Panel
  2. Ethernet Input Jacks
  3. Output Connection Panel
  4. Ethernet Output Jacks
  5. Active Status Indicators
  6. Control Output to Secondary Disconnect Controller
  7. Control Output from Secondary Disconnect Controller
ED Secondary - Specs - Dims 1.psd
Ethernet Secondary Disconnects - Wall Mount - Hero.psd
Model Number Description
DDS-EWS8D Ethernet Secondary Disconnect, 1 Ethernet Cable for 8 Dispensers
DDS-EWS88D Ethernet Secondary Disconnect, 2 Ethernet Cables for 8 Dispensers
DDS-EWS16D Ethernet Secondary Disconnect, 1 Ethernet Cable for 16 Dispensers
Ethernet Secondary Disconnects - Rack Mount - Hero.psd
Model Number Description
DDS-ERS8D Rack Mounted Ethernet Secondary Disconnect,1 Ethernet Cable for 8 Dispensers
DDS-ERS88D Rack Mounted Ethernet Secondary Disconnect, 2 Ethernet Cables for 8 Dispensers
DDS-ERS16D Rack Mounted Ethernet Secondary Disconnect, 1 Ethernet Cable for 16 Dispensers