Franklin Fueling Systems pre-packaged sumps offer a custom, complete ordering solution for your under-dispenser containment systems. Combine APT™ or UPP™ Piping & Containment System products with FLEX-ING™ and EBW™ brand Service Station Hardware products for an easy-to-order, ship, and install package.
Cashier Control Stations provide immediate shut off and resetting of dispensers and submersible pumps for compliance with National Electrical Code requirements. A full line of Cashier Control Stations are available to meet the specific site requirements of each application.
For retail fueling and convenience store applications, Configured Panel Solutions provide a complete petroleum control and power distribution solution for an entire location.
PetroSeal entry boots are two-piece boots for 50mm to 160mm UPP pipework. Using band clips and a backing ring to ensure a perfect fit and the highest quality entry boot.
Used to install, service, and test Defender Series® spill containers.
Ball float vent valves are used in conjunction with extractor vent valves in the Stage I vapor riser or tank vent lines on underground storage tanks. The ball float vent valve will restrict vapor venting should a full tank condition occur and protects against product mixing and vapor locks due to vent pipe flooding. The valve includes a brass installation cage that will fit all EBW® extractor vent fittings. All ball floats are fully compatible with alcohol/gas blends and biofuels (E-85, Biodiesel, B-20). WARNING: 308 Series float vents should not be used with suction pump systems. For use on gravity drop systems only. Do not use with pump-off unloading. Do not use with coaxial Stage I vapor recovery drop tubes.
Under pump/in-line check valves are designed to be installed directly in the inlet of the dispenser pumping unit to maintain prime on a suction system fuel line. The under pump/in-line check valve can also be used in a pressurized system at the submersible pump outlet to hold product in the line. Cast-in Hex for sturdy wrenching surface. NPT threads on both ends are designed to receive female threaded product lines. Pressure relief models relieve thermal expansion in the pumping unit, reducing the chance of vapor lock.
EBW™ brand monitoring well cap plugs expand on the inside diameter of the screen pipe casing to form a vapor and watertight seal. An integrated locking mechanism prevents unauthorized access. The locking mechanism features a captured bolt, eliminating potential drop-out. The cap is a distinctive yellow color and features the words "Do Not Fill - Monitor Well" which is molded into the cap.
UPP® steel electrofusion entry seals weld directly to the walls of steel chambers and underground dispenser containment. They provide a water tight seal between UPP® primary or secondary contained pipe and steel underground containment. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system.
The DC4830 is of bolted construction at the riser/base joint which will give a joint of the same quality as that to the tank for a fully watertight seal.