EBW™ brand monitoring well filter wrap is used on the outside of monitoring well screen pipe to further prevent fine soil from entering and blocking the slots.
EBW tank vents are designed to provide an open path for vapors from an underground or aboveground storage tank to the atmosphere.
EBW tank vents are designed to provide an open path for vapors from an underground or aboveground storage tank to the atmosphere.
EBW pressure vacuum vents are used on storage tank vent pipes to discharge vapors upward into the atmosphere. The top casting is dome-shaped to quickly drain off moisture including rain, snow and ice. Body and cover are cast aluminum. 2" and 3" models have vent rates of 8000 cubic feet per hour, and produce 8.0 ounces of pressure and 0.5 ounces of vacuum.
APT™ brand 4” XP Pipe ducting allows for simple and easy pipe removal without the need for extensive excavation. The 4” inside diameter of the ducting allows XP pipe to easily slide through during installation or removal. This updated design features integrated flat, non-corrugated sections which provide flat sealing surfaces for tight entry boot connections.
UPP® steel electrofusion entry seals weld directly to the walls of steel chambers and underground dispenser containment. They provide a water tight seal between UPP® primary or secondary contained pipe and steel underground containment. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system.
Under pump/in-line check valves are designed to be installed directly in the inlet of the dispenser pumping unit to maintain prime on a suction system fuel line. The under pump/in-line check valve can also be used in a pressurized system at the submersible pump outlet to hold product in the line. Cast-in Hex for sturdy wrenching surface. NPT threads on both ends are designed to receive female threaded product lines. Pressure relief models relieve thermal expansion in the pumping unit, reducing the chance of vapor lock.
Angle check valves are used on suction system fuel lines to maintain prime. EBW angle check valves are installed at the top of an underground storage tank suction line. Single poppet models are typically used where access to the valve is readily available.
EBW™ brand monitoring well cap plugs expand on the inside diameter of the screen pipe casing to form a vapor and watertight seal. An integrated locking mechanism prevents unauthorized access. The locking mechanism features a captured bolt, eliminating potential drop-out. The cap is a distinctive yellow color and features the words "Do Not Fill - Monitor Well" which is molded into the cap.
FLEX-ING™ brand hose retrievers are used to keep excess hose raised off the ground at sites which typically use long hoses such as truck refueling sites. The hose retriever prevents safety hazards, kinks, tangles and prolongs the life of the hose. Combine the hose retriever with the hose retriever base plate and hose support for a complete hose retriever system.