Communication/Intercom Secondary Disconnects are designed to expand the number and type of circuits that can be disconnected. They are used for intercom wiring and can also be used to disconnect additional communication conductors connected to a dispenser.
The FE PETRO® Dispenser Hook Isolation device prevents electrical feedback between dispenser hook circuits as required by most electrical codes.
APT® ducted double wall rigid entry boots allow you to create watertight connections between APT® 4” XP pipe and double wall fiberglass containment sumps. These boots are easily installed to the sump wall using adhesive (included) without the additional messy fiberglass work required. Rigid entry boots require only a single 3 ¾" entry hole for installation, eliminating the time-consuming process of drilling multiple holes as well as the templates they require.
With the PetroTite Standard and Optimum fusion chambers the riser section electrofuses to the base, removing the need for multiple bolt holes and foam gaskets in this area, therefore dramatically reducing the number of potential leak paths. With its simplified assembly, this electrofusion system also reduces the installation time. Welding of the chamber can be performed using UPP electrofusion equipment in approximately six minutes. Once welded and cooled the base and riser of the OCH models become one homogeneous unit, with no mechanical joints and no leak points. The chamber can then be vacuum tested to ensure that it is 100% leak-tight. The Optimum chamber is available with either Deep or Shallow bases, and both will allow for a very easy installation of pipework before the riser is fused into place.
FLEX-ING™ brand ball valves provide in-line product flow shutoff, making testing and inspection of equipment easy. Incorporating ball valves into the installation of your pipework system up front can save you on time, labor and dispenser shutdown costs for years to come. The use of ball valves allows you to isolate and shut down the flow of product to specific system components so you can perform maintenance or inspection on only the desired components, while the rest of the system remains in operation.
The Low Level Water Float for Diesel provides increased water level detection down to ¼", delivering early indication of the presence of water inside diesel tanks.
Interface modules, dispenser interface module cables, and paper supplies.
APT® Large Mouth Fiberglass Dispenser Sumps come in single and double wall options and feature large sump opening to provide easy installation and ample space for under dispenser containment. The dispenser frame and top are factory assembled and field glassed onto the sump after piping connections are completed. Note: Consult Customer Service to verify lead time on all double wall dispenser sumps. Two-week lead time on all fiberglass parts.
UPP® dispenser sumps feature a rigid 8mm thick HDPE body with reinforced contoured structure and integrated rain lip allowing them to stand up to harsh forecourt conditions such as ground movement or hydrostatic pressure. The neck of UPP dispenser sumps can be trimmed to adjust for varying sump burial depths ensuring an efficient installation. In addition, the durable steel UPP dispenser sump top frames feature conduit entry points which allow conduit to enter the dispenser through the top frame without having to penetrate the sump wall. The galvanized steel stabilizer bars feature pre-drilled shear valve mount plates and spring channel nuts for quick mounting. UPP electrofusion entry boots allow you to connect UPP pipework directly to the dispenser sump, creating a solid, one-piece construction and eliminating potential leak paths.
