The EBW Warden® is designed to provide a positive shut-off during a pressurized fill delivery on an aboveground storage tank. It eliminates spills and overfills, avoiding costly cleanup expenses and ground contamination. The Warden® is fully adjustable to provide shut-off in various height and capacity aboveground tanks. It is designed to fit into a 4" fill riser, making installation on new and existing locations simple and quick. Designed with inverted floats for use in small or large rectangular tanks. Requires 4" minimum ullage. Note: The Warden® is recommended for use with clean product only. Contaminated product may cause erratic operation or valve failure
Use these specialized APT™ brand tools to aid in your installation of XP pipework and containment systems.
EBW vertical check valves are used on suction system fuel lines to maintain prime. Check valves are installed directly below the dispenser pumping unit. EBW offers both single and double poppet models. Double poppet models offer twice the protection from losing prime. Metal to metal poppet seating. All valves are pressure tested to ensure accuracy.
The HEALY™ brand 600 Series Bootless Vapor Recovery Nozzles feature a bootless design for Stage II Vapor Recovery applications. For use on new or existing vapor-ready dispensers, this nozzle features internal vapor flow control which is performed without the use of electronics or variable speed pumps installed at the dispenser.
Replacement 5 gallon spill containers , include factory installed risers on both fill and vapor models. A drain valve is included on fill models as shown. Factory assembled and tested. For all direct bury and multi-port manways. 85000-EXT includes an extension for use with platform packages shown on page 64. Available as vapor, without drain valve, or fill, with drain valve.
Installing APT™ brand XP flexible pipe inside of a narrow-base dispenser sump has never been easier. The XP pipe clamshell tee and elbow fittings allow for an easy space-saving installation by enabling an installer to connect flexible pipe directly into a shear valve riser. This eliminates the need for extra galvanized fittings. By eliminating the galvanized fittings, you also reduce the amount of potential leak points, giving you peace of mind that your installation is secure. With the tee and elbow fittings you can complete an XP pipe installation inside of a sump in less than 16” of linear space. The stainless steel design of the fittings makes them an ideal solution for any fueling application.
One vacuum pump per dispenser supplies both sides, reducing long term maintenance costs. The VP1000 has been designed to satisfy the vapor recovery needs of a blender or non-blender dispenser. Simple installation with no excavation minimizes downtime and labor. The VP1000 connects to the dispenser with a simple interface module without costly software changes or electronic board replacement. This is the most cost-effective dispenser-mounted vacuum-assist system on the market today.
HEALY™ Low Permeation Conventional Hose Assembly is designed for use in refueling applications requiring reduced permeation rates of 10 g/m^2/day to improve air quality and emissions. This premium hose provides long-lasting service with multi-fuel compatibility.
