With the PetroTite Standard and Optimum fusion chambers the riser section electrofuses to the base, removing the need for multiple bolt holes and foam gaskets in this area, therefore dramatically reducing the number of potential leak paths. With its simplified assembly, this electrofusion system also reduces the installation time. Welding of the chamber can be performed using UPP electrofusion equipment in approximately six minutes. Once welded and cooled the base and riser of the LA models become one homogeneous unit, with no mechanical joints and no leak points. The chamber can then be vacuum tested to ensure that it is 100% leak-tight. The LA Chamber is available in Deep or Shallow risers.
The FE PETRO® standard single-phase control box latches line power to the submersible when the relay is energized by a dispenser signal. Compatible with FE PETRO® and competitive makes of single-phase, fixed speed submersible turbines up to 2 hp.
The FLEX-ING™ brand DuraDEF™ nozzle features a specially encapsulated aluminum casting which is lightweight yet completely DEF/AdBlue® compatible. It provides the performance and construction specifications required for DEF/AdBlue® delivery in a familiar, user-friendly design. This nozzle features a mis-fill prevention spout that prevents DEF from being dispensed unless the spout is engaged with a miss-fill prevention device (MPD). The MPD is available separately.
The FLEX-ING™ brand DuraDEF™ nozzle features a specially encapsulated aluminum casting that makes it lightweight yet completely compatible with DEF (Diesel Exhaust Fluid)/AdBlue®. This nozzle provides the performance and construction specifications required for DEF/AdBlue® delivery with a lightweight, more user-friendly design.
FLEX-ING™ brand diesel exhaust fluid swivel break aways provide in-line protection for hanging hardware in the event of a drive off. These break aways feature a stainless steel body that makes them extremely durable and completely compatible with DEF/AdBlue®. The break away design ensures proper drive-off protection and allows for easy installation directly between the nozzle and hose. The integrated swivel action provides easy nozzle rotation during vehicle filling while also helping to reduce hose wear and kinking.
Our objective is to utilize standard fittings whenever possible. Consequently, all APT swivel and non-swivel fittings are compatible with standard 1½", 2" and 2½" NPT plumbing fittings that can be purchased in your area.
UPP® brand composite access covers feature a lightweight, watertight design for safe and easy access to underground containment. The full composite construction of both the lid and the ring provide complete corrosion resistance.
The advantages you gain from upgrading from fixed speed to variable speed are undeniable. With variable speed conversion kits you can achieve higher, consistent flow rates, in turn boosting your profits, while eliminating the wear and tear hydraulic hammer can cause.
Ensure proper vapor recovery every time by using the Air Interlock with Limit Switch. With the limit switch, bottom loading cannot begin until a vapor recovery hose is connected to the vapor check valve. The switch does its job by breaking a connection in the secondary over-fill prevention system, thus preventing the rack monitor from giving a green light to the transport. Once a vapor line is connected, loading can begin. The coupler first depresses the plunger button of the interlock, which then locks the trailer brake system and completes the connection to the rack monitor. The vapor hose must be disconnected before the brakes will release, allowing the truck to be driven away.
APT bulkhead boots boast an enlarged gasket area to seal against the sump wall and incorporate the proven advantages of the APT standard flexible entry boot seal. The bulkhead boot requires only a single hole to be drilled for installation, reducing labor time and cost. APT offers a complete line of sizes for ½" through 2½" single and secondary contained pipe. The 1½" through 2½" sizes are also available in a ducted boot version to accommodate the use of APT DCT-400 corrugated ducting for easy retractability.