APT™ brand rigid entry boots allow you to connect electrical conduit to containment sumps with a significant reduction in installation time, while also completely removing exposed rubber from the connection. This durable entry boot requires only a single 2.75” entry hole for installation, removing the time-consuming process of drilling multiple holes for fastening purposes. A clamping nut and two clamping seals are used to compress the fitting into place against the sump wall simply by tightening it into place, providing a watertight connection between the boot and the sump surface. The same method is used to seal the pipe into place simply by tightening the integrated conduit seal nut. The interior pipe seal then compresses on to the pipe, providing another watertight connection between the boot and pipe.
EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet.
The Side Seal Adapter is designed to give flexibility to top seal drop elbows. Your 4" top seal delivery elbow can now be used on a side 4" seal fill adapter. You don’t have to bring a separate side seal elbow, which reduces cost and the number of fittings required on your truck. Two lever clamps secure the adapter to the station’s side seal fitting and allow a 4" elbow to attach to the adapter. Special locking rings prevent accidental cam arm release during filling. Cast aluminum makes the side seal adapter light and strong. The specially designed seal gives you the added insurance that no leaks will occur.
APT® secondary test boots are designed for testing the integrity of secondary contained flexible piping when using APT® clamshell fittings. Each boot has an air chuck for applying air pressure to the secondary containment jacket. Placing a boot on each end of the secondary containment jacket forms an airtight chamber for testing. After the testing is completed, slide the boots back on the pipe to open the secondary system. The boots remain on the pipe available for future testing as required by local regulations.
The HEALY™ 800 Series Onboard Refueling Vapor Recovery (ORVR) nozzle converts any new or existing dispenser to a CARB certified system for ORVR compatibility. The smart interface design will automatically detect whether a vehicle is equipped with ORVR to prevent over-pressurization caused by clean air being pulled back into the storage tank. Available for use outside of the United States.
Our objective is to utilize standard fittings whenever possible. Consequently, all APT swivel and non-swivel fittings are compatible with standard 1½", 2" and 2½" NPT plumbing fittings that can be purchased in your area.
The FLEX-ING™ brand DuraDEF™ nozzle features a specially encapsulated aluminum casting which is lightweight yet completely DEF/AdBlue® compatible. It provides the performance and construction specifications required for DEF/AdBlue® delivery in a familiar, user-friendly design. This nozzle features a mis-fill prevention spout that prevents DEF from being dispensed unless the spout is engaged with a miss-fill prevention device (MPD). The MPD is available separately.