For retail fueling and c-store applications, Power Distribution Solutions provide a complete petroleum control, power distribution, and backup power / generator transfer switching solution for an entire location.
Communication/Intercom Secondary Disconnects are designed to expand the number and type of circuits that can be disconnected. They are used for intercom wiring and can also be used to disconnect additional communication conductors connected to a dispenser.
EBW™ brand monitoring well screen pipes facilitate groundwater testing by allowing groundwater to pass through horizontal slots in the pipe. The screen pipe features precision cut slot apertures that provide a measured and uniform barrier to ingress with no sharp edges to damage the filter sock or oversized apertures that can allow bulging and perforation of the filter sock.
Use this Vapor Check Valve to return vapor to the truck during terminal loading and service station drops. The 3" poppet opens when coupled and closes when disconnected, preventing the vapors from escaping into the atmosphere. The valve has 3" or 4" female NPSM threads, a 4" cam and groove, and tapped mounting holes for the EBW Air Interlock Brake. The 303 series is available without a poppet to serve as a male quick coupler with an Air Interlock Valve mounting pad.
EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet.
The Side Seal Adapter is designed to give flexibility to top seal drop elbows. Your 4" top seal delivery elbow can now be used on a side 4" seal fill adapter. You don’t have to bring a separate side seal elbow, which reduces cost and the number of fittings required on your truck. Two lever clamps secure the adapter to the station’s side seal fitting and allow a 4" elbow to attach to the adapter. Special locking rings prevent accidental cam arm release during filling. Cast aluminum makes the side seal adapter light and strong. The specially designed seal gives you the added insurance that no leaks will occur.
The EBW 664 pressure regulator valve is designed to be used in conjunction with suction type dispensers connected to an aboveground storage tank. The pressure regulator valve prevents fuel from flowing to the pumping unit and flowing out the vent tube of the self-contained dispenser when the pump is not activated. The pressure regulator valve is a vacuum actuated valve which will not allow product flow until the suction of the pumping unit opens the valve. The valve closes by means of an internal spring when pumping is complete.
The wall transition sleeve is a practical, environmentally sound solution for below ground generator or boiler applications that pass through the walls of buildings or concrete structures. Piping enters the sleeve through APT’s special flexible entry boots. The wall transition sleeve is an economical alternative that allows a straightforward installation with no tools.