The DC4830 is of bolted construction at the riser/base joint which will give a joint of the same quality as that to the tank for a fully watertight seal.
The EBW 664 pressure regulator valve is designed to be used in conjunction with suction type dispensers connected to an aboveground storage tank. The pressure regulator valve prevents fuel from flowing to the pumping unit and flowing out the vent tube of the self-contained dispenser when the pump is not activated. The pressure regulator valve is a vacuum actuated valve which will not allow product flow until the suction of the pumping unit opens the valve. The valve closes by means of an internal spring when pumping is complete.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe.
The Guardian Series™ Three Phase controller takes a major leap forward in fixed speed Submersible Turbine Pump (STP) control. Built upon the fixed speed Single Phase Guardian Controller platform, three phase fixed speed pump controllers feature an enhanced user interface, greater functionality, and higher performance compared to standard control boxes.
Defender Series® Pressure/Vacuum (P/V) vents regulate the pressure at which vapor is allowed to escape from the underground storage tank and the vacuum at which outside air is allowed to enter the tank. The P/V vent’s internal rolling diaphragm delivers consistent and controlled cracking for both low leak and high-pressure conditions while the superior construction of UV-resistant materials extends the overall service life. The in-line vault provides added protection and facilitates at-grade servicing and testing. This eliminates the added expense of lift trucks as well as the potential safety concerns of conducting work at height.
FLEX-ING™ brand diesel exhaust fluid flexible connectors allow you to easily connect a pipework system to other systems components such as submersible pumps. Installers love their ease of installation while station owners have come to depend on their durability and how easy they make regular maintenance. The all-stainless steel construction provides complete compatibility with DEF (Diesel Exhaust Fluid)/AdBlue®. With tons of available options, Franklin Fueling Systems has the right connector to fit any application.
The EVO™ 600 and EVO™ 6000 are compatible with the Corrosion Control™ Water Separator and Corrosion Detection Sensor, allowing owners to fully automate the removal of corrosion-causing water from tanks and monitor for corrosive environments.
With faster fill times during peak hours and power savings during non-peak hours, FE PETRO® 2 Hp variable speed submersible pumps deliver maximized profits while mitigating operating expenses. 2 Hp submersible pumps are also available in fixed speed models.
Defender Series® Pressure/Vacuum (P/V) vents regulate the pressure at which vapor is allowed to escape from the underground storage tank and the vacuum at which outside air is allowed to enter the tank. The P/V vent’s internal rolling diaphragm delivers consistent and controlled cracking for both low leak and high-pressure conditions while the superior construction of UV-resistant materials extends the overall service life. The in-line vault provides added protection and facilitates at-grade servicing and testing. This eliminates the added expense of lift trucks as well as the potential safety concerns of conducting work at height.