Digital inventory and leak detection probes provide accurate tank level monitoring and reporting with optional leak detection capabilities. These probes employ digital communications and magnetostrictive position measurement technology for highly accurate tank readings.
Franklin Fueling Systems offers a complete system of Diesel Exhaust Fluid (DEF)/AdBlue® compatible products all from a single manufacturer.
The Multiplexing Sensor Hub™ (MSH) allows station owners to add the Corrosion Control™ Water Separator, Corrosion Detection Sensor, and other sensors to existing sites without having to break concrete to run new conduit and wires.
Ethernet Secondary Disconnects are secondary dispenser wiring disconnects designed to expand the number and type of cabling that can be disconnected. They are designed for dispensers that use Ethernet network cabling for secondary dispenser communication.
EVO™ Series Electronic Line Leak Detection (ELLD) is designed to provide early detection of leaks in pressurized fuel lines. The system features automatic submersible pump shutdown in the event of a leak, minimizing the risks of costly spills and environmental cleanup. This pressure-based system utilizes learned line characteristics learned to monitor for changes in pressure to declare the line as tight or determine if a leak is present.
Used to install, service, and test Defender Series® spill containers.
With the PetroTite Standard and Optimum fusion chambers the riser section electrofuses to the base, removing the need for multiple bolt holes and foam gaskets in this area, therefore dramatically reducing the number of potential leak paths. With its simplified assembly, this electrofusion system also reduces the installation time. Welding of the chamber can be performed using UPP electrofusion equipment in approximately six minutes. Once welded and cooled the base and riser of the OCH models become one homogeneous unit, with no mechanical joints and no leak points. The chamber can then be vacuum tested to ensure that it is 100% leak-tight. The Optimum chamber is available with either Deep or Shallow bases, and both will allow for a very easy installation of pipework before the riser is fused into place.
The FE PETRO® standard single-phase control box latches line power to the submersible when the relay is energized by a dispenser signal. Compatible with FE PETRO® and competitive makes of single-phase, fixed speed submersible turbines up to 2 hp.
With the PetroTite Standard and Optimum fusion chambers the riser section electrofuses to the base, removing the need for multiple bolt holes and foam gaskets in this area, therefore dramatically reducing the number of potential leak paths. With its simplified assembly, this electrofusion system also reduces the installation time. Welding of the chamber can be performed using UPP electrofusion equipment in approximately six minutes. Once welded and cooled the base and riser of the OCH models become one homogeneous unit, with no mechanical joints and no leak points. The chamber can then be vacuum tested to ensure that it is 100% leak-tight. The Optimum chamber is available with either Deep or Shallow bases, and both will allow for a very easy installation of pipework before the riser is fused into place.
Available with either 3 Hp or 5 Hp, the FE PETRO® High Capacity Submersible Turbine Pumps. (STPs) deliver efficient, reliable and quiet performance when high volumes or high speed deliveries of gasoline or diesel fuel are required.