UPP® dispenser sumps feature a rigid 8mm thick HDPE body with reinforced contoured structure and integrated rain lip allowing them to stand up to harsh forecourt conditions such as ground movement or hydrostatic pressure. The neck of UPP dispenser sumps can be trimmed to adjust for varying sump burial depths ensuring an efficient installation. In addition, the durable steel UPP dispenser sump top frames feature conduit entry points which allow conduit to enter the dispenser through the top frame without having to penetrate the sump wall. The galvanized steel stabilizer bars feature pre-drilled shear valve mount plates and spring channel nuts for quick mounting. UPP electrofusion entry boots allow you to connect UPP pipework directly to the dispenser sump, creating a solid, one-piece construction and eliminating potential leak paths.
HEALY™ vapor recovery break away valves provide full product and vapor shut-off in the event of a drive-off with 350 lbs of separation force. Reduce damage to the dispenser, vehicle, and forecourt with the immediate sealing of both fuel and vapor pathways. Both in-line and swivel break away valve options are certified to be reconnected in the field to help mitigate the cost of separations.
Designed to provide maximum protection from water intrusion with a simplified installation process, the Watertight Fiberglass Tank Sump delivers easy access to tank top equipment for fast maintenance and servicing. Completing the installation is simple. The pour-in-place slurry secures the riser to the base’s integrated channel, with no messy fiberglassing required. Available without bottom or with enclosed bottom.
At a fraction of the weight of typical steel access covers, a single technician can easily remove the lightweight FLEX-ING™ composite manways.
With the PetroTite Standard and Optimum fusion chambers the riser section electrofuses to the base, removing the need for multiple bolt holes and foam gaskets in this area, therefore dramatically reducing the number of potential leak paths. With its simplified assembly, this electrofusion system also reduces the installation time. Welding of the chamber can be performed using UPP electrofusion equipment in approximately six minutes. Once welded and cooled the base and riser of the OCH models become one homogeneous unit, with no mechanical joints and no leak points. The chamber can then be vacuum tested to ensure that it is 100% leak-tight. The Optimum chamber is available with either Deep or Shallow bases, and both will allow for a very easy installation of pipework before the riser is fused into place.
With the PetroTite Standard and Optimum fusion chambers the riser section electrofuses to the base, removing the need for multiple bolt holes and foam gaskets in this area, therefore dramatically reducing the number of potential leak paths. With its simplified assembly, this electrofusion system also reduces the installation time. Welding of the chamber can be performed using UPP electrofusion equipment in approximately six minutes. Once welded and cooled the base and riser of the OCH models become one homogeneous unit, with no mechanical joints and no leak points. The chamber can then be vacuum tested to ensure that it is 100% leak-tight. The Optimum chamber is available with either Deep or Shallow bases, and both will allow for a very easy installation of pipework before the riser is fused into place.
3" × 3" × 2" BSPT for manifolded vents SS ball. Aluminium
An Intake Filter Screen (IFS) provides fuel filtration for the entire system down to about the size of a grain of sand (0.009” openings). It’s designed to keep harmful debris, sediment, and tank corrosion from entering the pumping system and creating service events including dispenser filter changes.
FLEX-ING™ brand FLEX-ON™ Hardwall Hose features an abuse-resistant, solid wire braid construction that prevents kinking and assures a long service life and minimal maintenance. The ozone-resistant outer hose construction prevents ozone cracking and wear. This high quality hose offering features robust hose and fitting designs built to stand up to the harshest forecourt conditions.