APT™ brand 4” XP Pipe ducting allows for simple and easy pipe removal without the need for extensive excavation. The 4” inside diameter of the ducting allows XP pipe to easily slide through during installation or removal. This updated design features integrated flat, non-corrugated sections which provide flat sealing surfaces for tight entry boot connections.
UPP® steel electrofusion entry seals weld directly to the walls of steel chambers and underground dispenser containment. They provide a water tight seal between UPP® primary or secondary contained pipe and steel underground containment. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system.
The DC4830 is of bolted construction at the riser/base joint which will give a joint of the same quality as that to the tank for a fully watertight seal.
EBW™ brand monitoring well cap plugs expand on the inside diameter of the screen pipe casing to form a vapor and watertight seal. An integrated locking mechanism prevents unauthorized access. The locking mechanism features a captured bolt, eliminating potential drop-out. The cap is a distinctive yellow color and features the words "Do Not Fill - Monitor Well" which is molded into the cap.
Angle check valves are used on suction system fuel lines to maintain prime. EBW angle check valves are installed at the top of an underground storage tank suction line. Single poppet models are typically used where access to the valve is readily available.
Under pump/in-line check valves are designed to be installed directly in the inlet of the dispenser pumping unit to maintain prime on a suction system fuel line. The under pump/in-line check valve can also be used in a pressurized system at the submersible pump outlet to hold product in the line. Cast-in Hex for sturdy wrenching surface. NPT threads on both ends are designed to receive female threaded product lines. Pressure relief models relieve thermal expansion in the pumping unit, reducing the chance of vapor lock.
APT™ brand water-resistant tank sumps feature a water-resistant, gasketed lid with integrated hold-down toggles to prevent liquid from entering into the tank sump. Four lid toggles provide compression between the lid gasket and the riser without the need for any penetrations - eliminating potential leak paths.
The 4542 Series one-piece tank sump is made of high-density polyethylene with a factory installed gasket snap-on lid. The 16 side panels allow for pipe entry from virtually any direction. The 4542 Series is available in three burial depths. Each offers an optional inspection port (IP) for easy viewing of the interior of the sump without removal of the lid.
FLEX-ING™ brand diesel exhaust fluid ¾" break aways provide in-line protection for hanging hardware in the event of a drive off. These break aways feature a stainless steel design and internal components that make them completely compatible with DEF/AdBlue®. Upon separation the check valve in each half of the break away seals instantly, preventing fuel from escaping at both ends.