Designed to provide maximum protection from water intrusion with a simplified installation process, the Watertight Fiberglass Tank Sump delivers easy access to tank top equipment for fast maintenance and servicing. Completing the installation is simple. The pour-in-place slurry secures the riser to the base’s integrated channel, with no messy fiberglassing required. Available without bottom or with enclosed bottom.
EBW extractor vent valves are designed to fit into a 4" tank opening on an underground storage tank. Several outlet sizes are available to accommodate manifolded tank lines and Stage II vapor recovery installations. E-coated bodies are fully compatible for alcohol/gas blends and biodiesel.
PHIL-TITE™ multiport manways provide watertight access to spill containers for the filling of underground storage tanks. Available in a variety of sizes and configurations, the PHIL-TITE™ multiport manway design allows sump shield removal for regular maintenance or inspection without having to unthread and remove the spill containers. This is a key feature for markets that require costly permitting, site closure, and testing if the vapor space is broken by removing spill containers.
The EBW® brand sealing dip cap prevents the overflowing of a tank through uncapped tank dipstick risers. The 3" sealing dip cap incorporates a spring-loaded, self-closing internal valve which seals when the sealing cap is removed and the dipstick is not in place. This innovative safety feature provides overflow protection whether the sealing cap and the dipstick are removed, or the sealing cap is in position with an attached dipstick stored in the tank.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 308 allow a second boot to be fitted to the outside as a gravel guard. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
EBW® product shear valves immediately stop product flow in the event of fire or collision at the dispenser. A patented adapter shears upon impact, causing the poppet to seal on the valve body, preventing fuel spillage. If fire occurs, a fusible link releases the fulcrum arm, engaging the poppet.
APT™ brand water-resistant tank sumps feature a water-resistant, gasketed lid with integrated hold-down toggles to prevent liquid from entering into the tank sump. Four lid toggles provide compression between the lid gasket and the riser without the need for any penetrations - eliminating potential leak paths.