HEALY™ vapor recovery break away valves provide full product and vapor shut-off in the event of a drive-off with 350 lbs of separation force. Reduce damage to the dispenser, vehicle, and forecourt with the immediate sealing of both fuel and vapor pathways. Both in-line and swivel break away valve options are certified to be reconnected in the field to help mitigate the cost of separations.
As part of the CableTight™ Wire Management System, the Rigid Conduit System is ideal for applications where local regulations specify the use of ¾" bore rigid conduit but still require a liquid-tight containment entry.
Phase separation float kits deliver fuel inventory monitoring, water level detection, and phase separation detection all in one kit.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 308 allow a second boot to be fitted to the outside as a gravel guard. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
Franklin Fueling Systems pre-packaged sumps offer a custom, complete ordering solution for your under-dispenser containment systems. Combine APT™ or UPP™ Piping & Containment System products with FLEX-ING™ and EBW™ brand Service Station Hardware products for an easy-to-order, ship, and install package.
The vapor swivel adapter helps prevent leaks caused by constant delivery elbow movement on the riser adapter. The top section rotates during normal deliveries, preventing the bottom section from loosening on the riser pipe which could cause a vapor or product leak around the adapter. It’s poppet design seals off the vapor path when not coupled.
FLEX-ING™ fiberglass manways provide maximum access to tank sumps while delivering solid durability. They feature a full fiberglass construction with a composite lightweight lid for easy access. The unique contoured skirt design expands out to 47”, providing clear access to large tank sumps as well as giving the manway added strength.
The DTS is a discriminating turbine sump sensor that detects the presence of liquid and hydrocarbons when installed in tank containment sumps.
The TS-RA1 is a remote audible and visible alarm unit for use with Franklin Fueling Systems Automatic Tank Gauges.. The unit may be used as an overfill alarm as required by federal, state and local regulations, or as a general purpose remote alarm annunciator.
APT™ brand Fusion Ducted Entry Boots provide a watertight seal between XP Pipe and polyethylene constructed containment sumps. Utilizing the electrofusion welding process, the entry boot, ducting, and sump become one solid structure, creating a watertight entry into the containment space.