APT® double wall rigid entry boots allow you to create connections between APT® XP double wall flexible pipe and double wall fiberglass containment sumps. These boots are easily installed to the sump wall using the included adhesive with no additional messy fiberglass work required. Rigid entry boots require only a single 3¾” entry hole for installation, eliminating the time-consuming process of drilling multiple holes as well as the templates they require.
The Surge Management System provides surge protection for dispensers as well as multiple types of common electronic circuits in one, consolidated enclosure.
The Defender Series® Overfill Prevention Valve (OPV) prevents the overfill of an underground storage tank during a gravity-fed product delivery. It employs a revolutionary magnetically-coupled actuator system to provide positive shutoff. This unique method of shutoff eliminates any penetrations in the valve, making it both vapor and leak tight. This also allows for remote compliance testing of the primary functionality at grade level without having to remove the OPV from the tank.
EBW™ Anti Syphon Valves are recommended for all aboveground storage applications to prevent fuel from exiting the storage tank in the event of a broken line or leak. The Anti Syphon Valve will shut-off product flow when lines are broken, preventing fuel spillage and fire hazards.
This longer Coaxial Delivery Elbow is designed to accommodate the needs of the tank truck industry. The longer elbow is made of durable lightweight cast aluminum. The elbow connects to the product line and vapor recovery line at the same time, allowing for single point drop and vapor recovery. This elbow meets Stage I and II vapor recovery standards.
EBW® Steel Knock Down Manways feature a 3/8" diamond back steel plate cover with a galvanized steel skirt. Covers available in 16" × 16" and 24" × 24" dimensions, engineered and tested to meet or exceed H20 and HS20 load ratings, and each is individually boxed with skirt in knock down form for easy handling and storing.
These electrofusion entry seals weld directly to the walls of polyethylene chambers or sumps. They have been specifically designed to reduce the number of fittings necessary to provide water tight seals between the underground tank sump/chamber and the UPP primary or secondary contained pipe and electrical conduit or duct. The nature of the seal means that after installation it becomes one with the sump, with zero leak paths, creating a 100% leak tight system. The seals are polyethylene based allowing electrofusion of UPP pipework systems directly to the penetration, negating the need for mechanical boots and creating a homogeneous structure of the sump, boot and pipe. The spigot on both sides of the 305 allow for EIF welding. The seal is fully vacuum and pressure testable ensuring 100% leak free seals and sumps.
EBW pressure vacuum vents are used on storage tank vent pipes to discharge vapors upward into the atmosphere. The top casting is dome-shaped to quickly drain off moisture including rain, snow and ice. Body and cover are cast aluminum. 2" and 3" models have vent rates of 8000 cubic feet per hour, and produce 8.0 ounces of pressure and 0.5 ounces of vacuum.