With a thick and robust wall, the new duct is equally flexible and can be welded to electrofusion entry seals and other 110mm electrofusion fittings. The duct will provide a water tight chase for pipes or electrical cables when fully welded. This product is for use as an electrical duct or gravel guard for fuel pipework.
These lockable vapor caps act like dust covers, but won’t activate the Air Interlock Valve when used on vapor check valves and adapters. Iron-copper infiltrated cams create a solid push-down-and-pull-up movement for quick, easy removal and replacement; steel latches hold the caps secure. Orange in color to indicate vapor recovery, the caps can be used with any 4" male cam and groove. Caps also available with finger ring and chains.
APT™ brand 4” XP Pipe ducting allows for simple and easy pipe removal without the need for extensive excavation. The 4” inside diameter of the ducting allows XP pipe to easily slide through during installation or removal. This updated design features integrated flat, non-corrugated sections which provide flat sealing surfaces for tight entry boot connections.
EBW extractor vent valves are designed to fit into a 4" tank opening on an underground storage tank. Several outlet sizes are available to accommodate manifolded tank lines and Stage II vapor recovery installations. E-coated bodies are fully compatible for alcohol/gas blends and biodiesel.
For retail fueling and convenience store applications, Configured Panel Solutions provide a complete petroleum control and power distribution solution for an entire location.
The HEALY™ brand 600 Series Bootless Vapor Recovery Nozzles feature a bootless design for Stage II Vapor Recovery applications. For use on new or existing vapor-ready dispensers, this nozzle features internal vapor flow control which is performed without the use of electronics or variable speed pumps installed at the dispenser.
Probe Holders are anodized aluminum with ½" NPT openings positioned for easy access and wiring. An O-ring seal is standard for short and tall caps. The three bolt locking ring prevents probe movement and seals the housing from product splash and vapors. Two styles are available: a 2" Male NPT thread (908-262-01) or a cast lock nut (908-263-01).
All-In-One Dispenser Disconnects offer a flexible approach to disconnecting low voltage circuits including, data, credit cards, intercom/communication, and video/media circuit conductors connected to dispensers. Primary and secondary disconnects for both twisted pair and Ethernet circuits are combined into one space-saving, pre-configured enclosure.
This durable cast aluminum elbow ensures complete vapor recovery for dual point systems, and can be ordered with a variety of different adapters to meet any requirement. The simple four bolt flange design allows for easy replacement of adapters over competitive threaded styles. Its low profile design allows for convenient storage and the specially designed quick grip one hand operation handle allows for easy on and off attachments.