Replacement 5 gallon spill containers , include factory installed risers on both fill and vapor models. A drain valve is included on fill models as shown. Factory assembled and tested. For all direct bury and multi-port manways. 85000-EXT includes an extension for use with platform packages shown on page 64. Available as vapor, without drain valve, or fill, with drain valve.
As part of the CableTight™ Wire Management System, the 110 mm Ducting System is ideal for grouping a large quantity of cables into a single run back to the main store kiosk.
The HEALY™ clean air separator prevents excess emissions and product loss by controlling gasoline storage tank pressure. The unit works in combination with Healy ORVR/EVR type nozzles as part of a system that increases overall performance and efficiency.
With the PetroTite Standard and Optimum fusion chambers the riser section electrofuses to the base, removing the need for multiple bolt holes and foam gaskets in this area, therefore dramatically reducing the number of potential leak paths. With its simplified assembly, this electrofusion system also reduces the installation time. Welding of the chamber can be performed using UPP electrofusion equipment in approximately six minutes. Once welded and cooled the base and riser of the OCH models become one homogeneous unit, with no mechanical joints and no leak points. The chamber can then be vacuum tested to ensure that it is 100% leak-tight. The Optimum chamber is available with either Deep or Shallow bases, and both will allow for a very easy installation of pipework before the riser is fused into place.
The Surge Management System provides surge protection for dispensers as well as multiple types of common electronic circuits in one, consolidated enclosure.
These air interlock valves were designed to operate two different air systems at the same time. The lightweight valves are designed to lock the trailer brakes and open the air operated vapor valve at the same time. These six-way air valves can be used in the normally open (N/O) and normally closed (N/C) configurations of N/O, N/C, or N/O, N/O, or N/C, N/C positions. They have an adjustable stem and come standard with TTMA and API mounting holes.
Temperature sensors detect changes in liquid temperature and is ideal for use with diesel exhaust fluid (DEF/AdBlue®) as part of a recirculation system to prevent the freezing of liquid in colder climate applications.
With the PetroTite Standard and Optimum fusion chambers the riser section electrofuses to the base, removing the need for multiple bolt holes and foam gaskets in this area, therefore dramatically reducing the number of potential leak paths. With its simplified assembly, this electrofusion system also reduces the installation time. Welding of the chamber can be performed using UPP electrofusion equipment in approximately six minutes. Once welded and cooled the base and riser of the OCH models become one homogeneous unit, with no mechanical joints and no leak points. The chamber can then be vacuum tested to ensure that it is 100% leak-tight. The Optimum chamber is available with either Deep or Shallow bases, and both will allow for a very easy installation of pipework before the riser is fused into place.
At a fraction of the weight of typical steel access covers, a single technician can easily remove the lightweight FLEX-ING™ composite manways.